I can't switch the power button to left to get power to come on. How can I fix?

common problem. might need tho be calibrated. turn off front power switch and then the rear main power switch. turn on the front switch, hold down energy save button and copy button, turn on rear switch and continue to hold energy and copy buttons until the screen displays an X in the top left of the display. immediately release the buttons and touch the X with a pen/pencil/pointed object. the X will move to the center and them to the bottom right of display. touch the X as it moves position. the copier will reboot and the display may work. if not, replace the touch screen. part #n2baayy00771.

Sounds like one of the menu or function buttons on the TV has been pressed in too hard. It's now pushed in permanently. The remedy is to open up the set and unstick the button.

Hi, NOTE: First make sure that your iPod's hold button isn't on. This is the little switch at the top left corner of the click wheel iPod that you can move to "lock" the iPod's buttons. If this is on, you'll see a little orange area at the top of the click wheel iPod and a lock icon on the iPod's screen. If you see either of these, move the switch back and see if this fixes the problem.

If the hold switch wasn't the problem do the following:


Move the hold switch to the on position and then move it back to off.


Hold down the Menu button on the click wheel and the center button at the same time. Hold these together for 6-10 seconds. This should restart the iPod video. You'll know the iPod is restarting when the screen changes and the Apple logo appears.


If this doesn't work at first, you should repeat the steps.

If this doesn't work, you should try plugging your iPod into a power source and let it charge. Then repeat the steps.


If this doesn't work, you may have a bigger problem, and ought to get more help.

apple.com/support/ipod/

1. Set the Power switch to CAMERA.
2. Set the Mode switch to TAPE. (VP-D353(i)/D354(i)/D355(i) only)
3. Press the MENU button.
4. Move the Menu selector to the left or right to select Camera, then press the Menu selector.
5. Move the Menu selector to the left or right to select Digital Effect, then press the Menu selector.
6. Move the Menu selector to the left or right to select the desired Digital Effect mode, then press the Menu selector.
7. To exit, press the MENU button.

I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

Try this! http://ipod.about.com/od/troubleshootingyouripod/ht/reset_ipod_nano.htm Difficulty: Easy Time Required: Less than 1 Minute Here's How:

1. NOTE: First make sure that your iPod’s hold button isn’t on. This is the little switch at the top left corner of the iPod video that you can move to “lock” the iPod’s buttons. If this is on, you’ll see a little orange area at the top of the iPod nano and a lock icon on the iPod’s screen. If you see either of these, move the switch back and see if this fixes the problem.
   If the hold switch wasn’t the problem do the following:
   
2. Move the hold switch to the on position and then move it back to off.
   
3. Hold down the Menu button on the clickwheel and the center button at the same time. Hold these together for 6-10 seconds. This should restart the iPod nano. You’ll know the iPod is restarting when the screen changes and the Apple logo appears.
   
4. If this doesn’t work at first, you should repeat the steps.
   
5. If this doesn’t work, you should try plugging your iPod into a power source and let it charge. Then repeat the steps.
   
6. If this doesn’t work, you may have a bigger problem, and ought to get more help.
   

Hello :

1: First make sure that your iPod’s hold button isn’t on. This is the little switch at the top left corner of the iPod video that you can move to “lock” the iPod’s buttons. If this is on, you’ll see a little orange area at the top of the iPod nano and a lock icon on the iPod’s screen. If you see either of these, move the switch back and see if this fixes the problem.
If the hold switch wasn’t the problem do the following :

2: Move the hold switch to the on position and then move it back to off .

3: Hold down the Menu button on the clickwheel and the center button at the same time. Hold these together for 6-10 seconds. This should restart the iPod nano. You’ll know the iPod is restarting when the screen changes and the Apple logo appears.

4: If this doesn’t work at first, you should repeat the steps .

5: If this doesn’t work, you should try plugging your iPod into a power source and let it charge. Then repeat the steps.

If that didn't help , then you should take your NANO to the service .

good luck .

please rate !

Spray all mechanical parts of door latches with a good solvent...That should get them working if sticky.If that dosent work then solenoids inside doors need to be be sprayed inside small rubber boot on control rod end. L door panel needs to come off to re-connect control rod for rocker switch. (try first just removing lock trim panel and see if you can get to rod from there first.)

Hi,
unplug the power cable
Press and hold # and 6 on the printer while keeping these tow buttons on hold plug the power cable back in . when the screen goes off release the buttons and press the power button to turn the printer on. it ll perform a semiful reset on the printer .
if the issue still persists then unplug the power cable again
Press and hold OK and CANCEL on the printer while keeping these two buttons on hold plug the power cable back in . when the screen goes off release the buttons and press the power button to turn the printer on .
it should fix the issue else call HP CARE and they ll replace it for u

:-)

Move the second button from the left to set, enter the time in 24 hour format via the HH and MM buttons, then move the button to start. The far left switch, on/auto.off is for the chime. Set to on for 24 hour alarms, set to auto for no chime from 11pm til 6am, set to off, to turn it off.

I have Polaroid TV Monitor HDMI LCD 15.4" no power light on TV, blank screen, the power adaptor is Ok 12VDC supply. I need suggestion; in any possible problem or parts busted?