Re: Can a blue ray player be input to the back panel...
You would normally connect a Blu-ray player to the TV using an HDMI cable. A digital optical audio cable connects the Blu-ray player to the home theater system.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It all depends of how you have connected the dvd (blue ray). see the cable going from your player to the television and take note of the name of the input socket and on your tv remote you will have a source button, this will present you with all the avalaible inputs, just select the one.
whatever the player uses --Component (blue-green-red) or composite or HDMI for output connect to the correct and identical input on the rear of the set----switch to that input and see what you have.
hi, do the following. 1. connect ur blue rays hdmi out to ur tvs hdmi input. 2. connct blue rays out to any one of the coaxial(aux) input of bose. 3. connect ur tvs optical audio output to optical audio input of bose 4. connect monitor out of ur bose to any one of ur av in of ur tv. connect component video to better quality . 4 . in the blue rays audio setup select audio output priority as optical/coaxial 5 . in bose set aux as digital input. to see blue ray select hdmi of ur tv, sellect in bose in which the blue rays coaxial is connected(aux) insert disk in blue ray an watch to see dvd in bose select tvs corresponding input, select bose to dvd . insert dvd and watch to whach tv program set tv to corresponding mode. set bose to optical audio input mode. ok
Depending on if your surround system has a hdmi input or not. if it does you can connect the blu-ray player to it. If it doesn't have an hdmi input you will have to run the hdmi cable from the blu-ray to the tv then run a set of rca cables (red and white plugs) from the tv audio out to the surround systems' audio input jacks to get sound through the surround system. Most surround systems don't have an auxiliary input for another video device.
Make sure the cables from the blue ray player are hooked up to the right 1080 high def input jacks on the back of the TV. There is two different sections, one for regular 480 inputs and another for the 1080i....
A blu ray player will play on any television. The television might not however have the highest resolution to display the full capability of a blue ray. That being said, the blu ray player may be faulty the connections may be incorrect. I would recommend running an HDMI cable from the A/V out on the blu ray to the HDMI input on the TV. GOod Luck
It sound like the cable box or the Blue ray player is set to high - such as 1080P when the set is only rated at 720 - try scaling the output down and see if that helps
×