Mr slim remote not working?

The buttons on the set are stuck or the circuit that decodes the button presses have malfunctioned
https://www.6ya.com/mr.mike

[PDF]PAR-30MAA - Mitsubishi Electric Australia

https://www.mitsubishielectric.com.au/.../IB_PAR-30...

Mitsubishi Electricand Mitsubishi Mr. Slim Air Conditioners. MA Remote Controller ..... Heat. 17 ~ 28 ?C (63 ~ 83 ?F). Auto. 19 ~ 28 ?C (67 ~ 83 ?F). Fan/Ventilation. Not settable. 13 ...

[PDF]PAR-31MAA - Mitsubishi Electric Australia

www.mitsubishielectric.com.au/.../par-31maa_ib_en.p...

Mitsubishi Electricand Mitsubishi Mr. Slim Air Conditioners. MA Remote ..... Heat. 17 ~ 28 ?C (63 ~ 83 ?F) .... Preset cooling temperature is higher than preset heating temperature.

My air recycle button just blinks. Also when i turn on the - Fixya

www.fixya.com/support/t26081705-air_recycle_button_just_blinks_also

6 hours ago - Not sure the heat pump is producing enough heat. Nov 04 ... Preset heat stuck at 63. ... Feb 05, 2016 ' Mitsubishi Electric Mr Slim E12C26426.

[PDF]MA Remote Controller Mitsubishi Electric PAR-21MAA ...

planetaklimata.com.ua/.../Mitsubishi_Electric/Mitsubishi_Electric_PAR-2...

Easy Maintenance Function (Only for Mr. SLIM PUHZ series) . .... 4.4.3 Automatic Cooling/Heating Display Setting . ... Monitoring the Operation Data by the remote Controller (for Mr. SLIM) .......... ..............48 . How to .... 63. 4.2 How to set rotation function(back-up function, 2nd stage cut-in function) . ... Preset temperature (. °C. ).

Hi Diane,


Your remote control has a reset button in front just below the timer button key. Press it using a pointed material like a paper clip to make it functional reset.


Let me know if the remote control still not functioning to assist you further.


Jdvillanueva

No by mistake, cool only remote has been packed with you set.Or remote icon problem. Please contact your supplier to replace heat and cool remote. Thanks.

An online version of the Mr. Slim MXZ30TN manual is posted here on Fixya.com You can access it below:

http://www.fixya.com/support/p92250-mitsubishi_mxz30tn_air_conditioner/manual-21452

I hope this was helpful - good luck!

probably faulty remote control, or faulty control card in unit.try pushing the test button inside the indoor unit near the electrical cover

If you do not have a windbaffle installed on the outside unit the unit may never come out of defrost in low ambient temperatures. Depending on the outside temperature it might be telling the pcb to stay in defrost to keep the compressor from slugging and being damaged.

If it's a Minikit Slim, did you try to reset it ? To do so :
1. Press simultaneously the jog wheel and the Reset button located at the back of the Parrot MINIKIT Slim / Chic.2. Release the Reset button.
> You can now release the jog wheel.

Important information for those of you who have this problem (the kit freezes and buttons don't work anymore, even the reset).
Thisproblem may appear when the battery level is too low.Parrot has fixedthe problem now, below is the procedure to follow for those who stillhave this problem :
1- Leave the Minikit slim in charge for ~30min
2- The reset becomes functional :
- Press the rotator button,
-Press the reset hole, keeping the rotator pressed ( on the back, with apaper clip ), and then release the reset button first.
- Release the rotator
The Minikit slim should be functional...
3- Make an update with the version 1.06 ( install the PSUT http://www.parrot.com/uk/support/downloads...)
/!Attention : people who have the problem and already have version 1.06need to update again (changes have been made on version 1.06 )

I hope this helps and good luck.

all the mitsubishies had auto diagnosis,you must set up with the remote control to see the code and how many times blinking the button to the indoor unit.

Need to know the year of the system, I would reccomend going to www.mrslim.com and looking up your unit. You will be able to get the full service manual for it