Samsung tv no picture

Check its front panel switches for damage. If any one among them has got strucked, this type of fault can occur.

Hello there.

Please use the volume control on the side of your handset, to increase the volume.

Notice on the picture here when the volume control is located.

Hope this helps.

If sound on one HDMI and not the others---all three should go to the same board--either something is not connected inside or the replacement board is the issue---Samsung is known for making boards with the same part number on them that from week to week have different features or do not have certain features.

Try to trace where the working input goes and if to same board as other two you know what to suspect.

Hello Blindrid,
What I would suggest you do is Press your MENU button on the tv remote, Then down to SOUND and then Turn the AUTO VOLUME to OFF. Then come out of the menu screen.
Just to check that it has all work correctly. turn you volume upto a certain number for example 25
Then turn your TV off the turn it back on. Wait until it is displaying a picture then press the volume button Once either up or down and you should see that it will go to 24 or 26 depending on what button you pressed for the volume. This will keep your volume set to whatever you had it on before you turned the tv off.

Hope this Helps Please leave a thumbs up.

Cheers

Little Dish Fitter

you can always use the button on your Tv itself.

ie menu = Menu
Channel up/down = take you up and down
volume = goes left and right.

follow these steps

Menu,
channel down button to CHANNEL
press the volume button along
channel down button to AUTO STORE
press the volume button to Start the scan.

right now you have your telly tuned in. What you could do it get an old sky remote off a friend/ neighbour. or buy from argos etc ( a lot cheaper then getting a replacement samsung one)

press the following buttons on the sky remote to program it to work with your samsung tv.

TV,
RED + SELECT
TV.
0060

try the volume if this works press SELECT to save this code if it doesnt press Tv then try the volume again. repeat this step until the volume works your telly. once it doest dont forget to press the SELECT button to save.

Now you will be able to change your volume use the number keys. if you also press the HELP button on the sky remote this will also change your AV / SOURCE I hope this post helps you out. When it does please leave a thumbs up for me Please

Cheers Little Dish Fitter

please follow the steps below:

TV
RED + SELECT
TV
0060

try the volume if this works then press SELECT to save the code. If not then press TV again then the volume. repeat this step until the volume works then press the SELECT button to save the code.

cheers

Little Dish Fitter

In the menu, there should be an option for AUTO VOLUME, see what this is set at, change it and see if it works. Also there is another option for INTERNAL MUTE, though I still haven't found out what it's for, myself. Give both a go. If neither of these work, try looking at the support pages on the Samsung website. Other than that, I can only suggest you take it back to where you purchased it, and ask for an exchange.

For the V+ remote control (Virgin Media have a picture of it here - http://www.virginmedia.com/images/types7-8n.jpg - the code is 0079.

http://tv.rca.com/rcatv/TV/Templates/UGSelect.aspx?NRMODE=Published&NRORIGINALURL=%2fen-US%2fUserGuide%2ehtml&NRNODEGUID=%7b4240D67C-901D-4355-A45A-6C9A732AC77E%7d&NRCACHEHINT=NoModifyGuest


hope this link should help

you didn't mention even using the remote. any way if it does not control even doing manualy or with remote control contact the dealer of you tv and discuss the problem. This could happen now a days LCD tv's has a program to operate. i suspended the program of your tv has reset.