Question about Sony FD Trinitron WEGA KV-27FS100 27" TV

1 Answer

Intitial set-up process and auto program

I have a 27 " trinitron and for the last few days a window pops up in the middle of my screen. it states to go thru process for auto program again and again. if i go thru it, it'll say to do it again, and if i don't do it, it just keeps on popping up.
what do i do to solve this.

Posted by madgreek on

  • 7 more comments 
  • JR77 Nov 15, 2007

    I have the same problem with the same model. I've tried leaving it unplugged over night & resetting it to the factory defaults, but nothing has worked.

  • jandk Jan 05, 2008

    I also have the same problem with my 2002 manufactured sony trinitron, and after a few days the initial set up box came on so often we could no longer watch a tv show and then the tv began rapidly switching itself between video1,2,3,4 and the tv program I was watching. I have tried unplugging the tv, changing the batteries in the remote, vacuuming the tv to remove dust and nothing has resolved the problem. We now have my RCA tv bought in 1998 in its place for now.

  • Nursejimmy Jan 18, 2008

    I also have the same problem. The auto program screen keeps coming on and off. But I dont have the problem with the channels changing. It is so bad I cant even watch a tv show anymore.

  • TVTex Jan 20, 2008

    I also have the initial setup box come up in the center of the screne. It is intermittent, annoying and making the TV unacceptable to watch. Tried power disconnect and reset, nothing has worked yet. Comments please

  • bizzarre Apr 23, 2008

    auto program popup keeps coming on and going off. What can I do to fix the problem?

  • Anonymous May 12, 2008

    I have a 27 " Trinitron and for the last few days a window pops up in the middle of my screen. It states to go thru the process for auto program again and again. I've done this over and over again. The window still comes back. Now, the window blinks so often, I can't even get to the menu to go through the process. IT KEEPS BLINKING ON AND OFF!!!!! HELP!!!! Is it a lost cause????

  • dwinterle May 13, 2008

    I have the exact same problem. It is amazingly frustrating to watch TV now. Is there anything we can do to fix this issue?

  • mrsfixit482 May 25, 2008

    I have the same problem, did you find a solution? [email protected]

  • Anonymous May 29, 2008

    hi, i have the same problem :-( now we are at the point where the remote doesn't work anymore either. i have to adjust the volume on the set itself and had to hurry up to set the time and timer again without the initial setup screen blinking in (we unplugged the set because we thought maybe it needs a break). and all of the sudden it changes from tv mode in one of the video modes (sometimes video 1, sometimes 4 ...)
    any new tips except the board to change??
    thx
    cmb


×

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

Get a samsoung they are the best money can buy

Posted on Jan 22, 2008

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Got rid of cable, how do I change from set channel 3 to open channel choices.


To perform Auto Program again
1 Press menu
2 Press right arrow to highlight Channel Setup Menu.
3 Press down arrow to highlight Cable. Press + to select.
4 Press up arrow or down arrow to select On or Off according to how you connected your TV. Press .
5 Press down arrow to highlight Auto Program. Press + to search for channels.
6 After performing Auto Program, press menu to exit.


This should pull in all of your over the air channels

Dec 02, 2010 | Sony FD Trinitron WEGA KV-27FS100 27" TV

1 Answer

Tv turns on but the screen in black....worked a few days ago and last night but now it is giving the black screen again


Change Your Hi Voltage Regulator Triac Mosfet Static Problem...
The Voltage Regulator need a proper Choke to iniate a cold start_up All Sony Trinitron got Heat Problem Paste dry too fast betwen the heat_sink and the Regulator....

Sep 21, 2010 | Sony FD Trinitron WEGA KV-32FS120 32" TV

1 Answer

Describe your Sony FD Trinitron WEGA This started


I have the exact same problem. If you get anywhere (I can't) please contact me at [email protected]. If I figure it out, I'll get back to you.

Good Luck.

T

Sep 09, 2009 | Sony FD Trinitron WEGA KV-27HS420 27" TV

1 Answer

Sony Trinitron turns on in the middle of the night for no reason


maybe the people next door have a powerful remote, and when they turn their tv off a night it turns yours on?

Dec 11, 2008 | Sony FD Trinitron WEGA KV-27FS120 27" TV

1 Answer

Auto program message


welcomejee said the problem is a result of dry solder on the 80 pins IC mounted at the rear side of the main board. It can be resoldered.

Aug 26, 2008 | Sony FD Trinitron WEGA KV-27FS100 27" TV

1 Answer

The "Initial Set Up" Box continues popping up and will not go away despite auto programming


Sounds like you are skipping a step....consult owners manual
for procedure...if missing manual,download a copy...google Sony tv owners manual..............................T.

Jan 09, 2008 | Sony FD Trinitron WEGA KV-36FS120 36" TV

1 Answer

Sony trinitron wega KV-XR TV


Activate / de-activate by pushing display button on any Sony
remote control........................T.

Jan 07, 2008 | Sony FD Trinitron WEGA KV-27FS100 27" TV

1 Answer

Sony Wega KV-27FS100 RANDOMLY Turns itself ON


You said around 4pm TV is switched on everyday. Check in menu options any on-timer and off-timer is changed. If it is not there is a problem in microprocessor section. EEPROM ic malfunction also shows these type of symptoms. But it can be done by Technical persons only. This is not a major problem. This is due to surge current and lightening like that.

Sep 06, 2007 | Sony FD Trinitron WEGA KV-27FS100 27" TV

1 Answer

Set-up screen keeps popping up


This might not be a solution but it is a suggestion,your set by now has many loose conections this is as true as your name Less,I would suggest to go in looking for loose conections and overheated ares,while you are looking check the horizontal driver transformer and make sure all 4 legs are solid,this is only as a preventive maintenace,as far as the reason why is doing what is doing I got a feeling you will find an intermitant conection.If you are not familiar with tv service be safe and call for assistance.It should not be expensive.

Oct 01, 2006 | Sony FD Trinitron WEGA KD-27FS170 TV

Not finding what you are looking for?
Sony FD Trinitron WEGA KV-27FS100 27" TV Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76407 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...