Question about Fisher and Paykel Fisher & Paykel Washer

Open Question

Fisher &paykel gwl15 top load washer water fills but doesnt stay in tub ?

Posted by Anonymous on

Ad

5 Related Answers

Anonymous

  • 145 Answers

SOURCE: Fisher Paykel washing machine model # GWL15 drips

Hi Dale..
It sounds like you have a leaky inlet valve assembly. The part number is 421029P and is easy to replace. You can get one here:
http://www.fisherpaykelparts.net/ecart/item.php?item_id=266&category_id=56

Posted on Apr 20, 2009

Ad

Anonymous

  • 10 Answers

SOURCE: Fisher & Paykel GW612 Top Loading Washing

Hi there
That fault is the pump blocked error (no change in water level).
i have a quick and easy way to solve this problem.

first turn the machine off then tilt the machine back and lean it on something(a chair or wall), look underneath, in the top right hand corner of the plastic outer boul you will see a small pump motor it has a fan on it spin this fan and if it is hard to turn that means there is somthing stuck in the drain pump keep turning the fan and try to free whatever is stuck in the pump, then try the machine on spin again all goin well the object in the pump should come out with the drain water(doing this will not harm the machine) if the object is still stuck you will need to get the water out of the machine (bailing or siphioning will work) and tilt the machine back again and take the wires off the pump and there should be a white tab on the boul holding the pump on pull this tab and twist the pump anticlockwise about a quarter turn(you will need a few towels or a boul or bucket to catch the water) and it should come off exposing the blockage.
Hope this solves your Problem.

Nick

Posted on Aug 03, 2009

Ad
hattonhall

Poppa Maddo

  • 372 Answers

SOURCE: fisher & paykel fill up with water then

Yep it sounds like another electronics panel has failed.
We never had this much trouble in the old days with the old electric timer machines.

Posted on Oct 19, 2009

Anonymous

  • 714 Answers

SOURCE: Fisher Paykel washer dripping after wash is complete

replace your water inlet valve can order from Repairclinic.com

Posted on Mar 01, 2010

luisa_sgro

  • 713 Answers

SOURCE: how do I take apart my fisher & paykel top

Hi just read your posting.Now if you look under the machine to the front right you will see a fan.This is your pump.Turn the fan a few times to loosen it.The fan should turn freely.Put the machine back on its feet and select a spin cycle and push the start button.The machine should start to drain.Please reply on how you got on or if the machine still does not drain or for further assistance.Looking forward to your reply.

Posted on Oct 08, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does it leak, even when machine is not running?


Small leak/drip with Fisher & Paykel GWL11 Washer (with ...

ths.gardenweb.com > Home Forums > Laundry Room
May 6, 2008 - Got a small drip/leak with my GWL11 washer..... The washer is ...Small leak/drip with Fisher & Paykel GWL11 Washer (with pictures) ..... New project for a new year: Light a fire under plans for an outdoor oven and claim the best pizza in town ... Speed Queen Front Load AFN50 Washer Review - Long Post.

Fisher and Paykel GWL11 Top Loading Washer

ths.gardenweb.com > Home Forums > Laundry Room
Mar 5, 2008 - My GWL11 Top loading washer has had nothing but problems! ... I have a Fisher Paykel GWL11 that I purchased new and have loved until this problem started. ... The machine fills with a small amount of water to saturate the clothes ...... Fault 36 is related to water leaking, but is *not* the kind of leaking from ...

Fisher and Paykel GWL11 Top Load Washer - faqqq

www.faqqq.com/.../fisher-paykel-gwl11-washer-leaking-and-squealing-fish...
Question Product: Fisher and Paykel GWL11 Top Load Washer Question Details:Fisher Paykel ... Small leak/drip with Fisher & Paykel GWL11 Washer (with .

Dec 12, 2015 | Fisher and Paykel GWL11 Top Load Washer

1 Answer

Fisher & paykel washer will not allow water in to fill the machine


Hello, unplug the washer and take the control panel out to access the water level switch again. Remove the pressure tube that goes to the tub. Then see if it still does the same thing, if when you remove the tube the washer will fill, that tube is partially clogged causing pressure to be trapped in the tube, clean it out. Note that if it start to fill unplug the washer because it will overflow with that tube pulled off.
Thanks

Jun 12, 2010 | Fisher and Paykel GWL11 Top Load Washer

2 Answers

Pump does pump but makes noise. I suppect it has


The pump is on the bottom. It has a locking tab you release, then you twist the pump a quarter turn and she drops out the bottom.

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

May 25, 2010 | Fisher and Paykel WA37T26G Top Load Washer

1 Answer

Water runs continuously tub never fills My Fisher & Paykel top loader keeps filling and draining at the same time. It never gets full of water. The hose is way higher than the machine, but still drains...


where is water draining into? have u got grey water hose attached to it?make sure u can see end of drain hose, put into bucket at lid level, if it still drains as it fills u have a faulty control module.please reply for more help

Apr 06, 2010 | Fisher and Paykel IWL12 Top Load Washer

1 Answer

Fisher Paykel washer dripping after wash is complete


replace your water inlet valve can order from Repairclinic.com

Mar 01, 2010 | Fisher and Paykel IWL12 Top Load Washer

2 Answers

Fisher Paykel washing machine model # GWL15 drips


Hi Dale..
It sounds like you have a leaky inlet valve assembly. The part number is 421029P and is easy to replace. You can get one here:
http://www.fisherpaykelparts.net/ecart/item.php?item_id=266&category_id=56

Apr 20, 2009 | Fisher and Paykel GWL11 Top Load Washer

3 Answers

Fisher and Paykel Washer Leaking


For those with water on floor after wash, check my post on "eco smart won't drain, smells hot". It could be something clogging drainage area at very bottom of the tub. I couldn't see the sock that was stuck in my FP's drain when I looked from the top between the white outer tub and the wash tub--everything looked fine. Then I removed the black motor/white plastic housing piece--Tip back washer and you should see this black electric motor/white housing on bottom. see my post for how to remove and check for plugged drain. it's really pretty easy.

don't know about outer tub holes, but glad i don't have that problem.

i hate my fisher paykel washer/dryer. i can't wait to sell this house--i will leave them here and get a new front load Duette for my next house!

May 31, 2008 | Fisher Paykel EcoSmart GWL15

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Washing Machines Experts

Michael Thomas
Michael Thomas

Level 3 Expert

3053 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

peter gittos
peter gittos

Level 2 Expert

247 Answers

Are you a Fisher and Paykel Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...