Question about LG Electronics Ld451egl 45-Pint Dehumidifier
My dehumidifier stopped collecting water. Everything else seems to work, there is just no water extraction.
Posted by Anonymous on
Apparently, the fans are running, but the compressor has shut down. It could be a failed compressor, or the charge in the system could have leaked out causing the compressor to shut down.
Posted on Aug 02, 2014
Make sure the filter is clean and also make sure the coils are cleaned. If these are clogged they will restrict airflow which will cause the coils not to remove the humidity from the air. LG recommends that you clean the air filter every 2 weeks. They also include a brush to clean the coils. If this still does not work you will need to contact LG for service or a replacement. They have a 5 year warranty on them so the ones that you guys have should still be under warranty. Make sure that you have your reciept when you contact them to prove that it is still under warranty. Keep me posted. Also please rate my solution when you get a chance. Thanks - Tech101
Posted on Jul 08, 2008
1- check if the water collecting bucket is properly installed (the light will show is ON but if the bucket is not propely installed -pushed in the proper position ) -make sure the slots on the bottom of the dehumidifier are posisioned correctly.
Posted on Oct 04, 2008
SOURCE: LG dehumidifiers
It is defective. The coils are not getting cold enough to condense water in the air. If you have the receipt and the unit is less than 5 years old, give LG a call for warranty repair.
Posted on May 15, 2009
Tips for a great answer:
Aug 30, 2011 | Whirlpool Gold AD70USS 70 Pint Per Day...
Aug 12, 2011 | DeLonghi Dehumidifiers
Jun 11, 2011 | Amcor AHD65 Dehumidifier
Feb 07, 2011 | DeLonghi DH40P Dehumidifier
Sep 02, 2010 | Frigidaire FDL45P1 Dehumidifier
Aug 22, 2010 | Kenmore Dehumidifiers
Apr 25, 2010 | Fedders A7DH45B2A Dehumidifier
Jun 01, 2009 | LG DH404E Dehumidifier
Dec 27, 2008 | Dehumidifiers
370 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: