Question about Husqvarna Viking 1

Open Question

How to replace presser bar lifter

Model 225

Posted by Anonymous on

Ad

1 Related Answer

SOURCE: The presser bar lifter on my Lily 540 broke and

check with

sewingpartsonline.com

or

sewingmachineparts.net

Posted on Jan 20, 2011

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Knee lift won't engage on my Juki. Ddl-8700industrial straight stitch


tilt machine back and look at the lifter bar. try moving it now without any pressure on it. move ok then problem too much presser ft tension of the lifter plate on the vertical bar under the machine is bent or not high enough or not align with the botton of the part the machine thta connects to the presser ft. the lifter bar connected to the knee lifter can be bent to line up with the bar on the machine. go to the other side of the machine and look in thru the oil pan to see how they match up.

Apr 07, 2014 | Juki DDL-8700 Industrial Straight Stitch...

1 Answer

Can't get my presser foot to fall down when I let go of the lifter on my Pfaff 6085 sewing machine


Sounds as if the spring for the presser bar is broken OR the presser bar is dirty and needs cleaned and oiled.

Feb 25, 2013 | PfaFF Sewing Machines

1 Answer

How do I change a pfaff 1222 presser bar lifter? I ordered a replacement part, but now I don't know how to remove it.


If you are lucky, your part will come with instructions. Each machine is a bit different but basically you have to get into the needle bar/presser foot bar area. If you are Lucky you can get to the lever assembly without having to take out a bunch of bars. But I've only ever seen that once on an industrial machine. So you take out the presser foot bar... to get to the lever. Use caution. You want to be sure you know where and how the parts fit in there. Take your time... take pics or make notes.

Good luck

Nov 17, 2012 | Sewing Machines

1 Answer

How to replace the presser bar lifter


Presser bar litter of my sewing machine is not working. How come i fix it?

Aug 13, 2012 | Singer Sewing Machines

1 Answer

Presser foot lifter is stuck can i fix it


If you can't lift the presser foot up at all undo the presser bar screw on top of the presser bar, if you have a dial turn it to 0, you should now be able to move the lever, if it is still tight put some WD40 on the presser bar and leave it for a couple of hours.

Nov 04, 2009 | Brother XL-5130 Mechanical Sewing Machine

1 Answer

Can't lift handle for my foot presser


Take the machine apart to the point where you can see the pivot point for the presser bar lifter and spray WD40. Let sit for a few hours and try again. Repeat until the presser bar lifter releases.

Sewing Machine Parts

May 18, 2009 | Kenmore 15208 Mechanical Sewing Machine

1 Answer

Faulty presser foot lifter on a singer 2110/2112.


I have seen these machines with broken presser bar clamps (something inside the head). If it is just a bind then some oil on the presser bar may work, if the clamp is broken then it is probably not worth fixing.
Good luck!

Jan 10, 2009 | Sewing Machines

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Sewing Machines Experts

sewcrazyshan

Level 1 Expert

19 Answers

Susan Null Spradlin

Level 1 Expert

14 Answers

Irene Tulloch

Level 2 Expert

498 Answers

Are you a Husqvarna Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...