Question about Troy-Bilt TROY-BUILT 91215 - TROY-BUILT 20416 Pressure Washer 5HP Gas 3000 PSI Gas Powered
Pw was empty of gas, added new gas to use and gas is leaking out from side filter how do i fix
Posted by Anonymous on
Your washer was sitting for a while I suspect. Check the carb and make sure it is tight to the engine. If it is then you will need to take the carb off, careful not to tear any gaskets. Then remove the fuel bowl and clean out all ports. Make sure to clean out the jet as well as I suspect the fuel is clogged in the carb and overfilling. Your needle valve is stuck open and then flooding your carb and spilling out the side of your engine. Make sure your needle valve and float can move freely before reassembling. Good luck
Posted on Feb 26, 2015
Tips for a great answer:
May 23, 2014 | Whirlpool GC5SHEXNS Side by Side...
Apr 13, 2014 | ProForce PWC102350 2,350 PSI 2.3 GPM 163CC...
Nov 05, 2011 | 2000 Oldsmobile Alero
May 23, 2010 | Karcher 2500 PSI Pressure Washer
Nov 15, 2009 | Coleman Powermate DuraBuilt 1400 PSI...
Jul 01, 2009 | Coleman Powermate DuraBuilt 1400 PSI...
Jul 29, 2007 | Karcher 2500 PSI Pressure Washer
Jun 16, 2014 | Troy-Bilt TROY-BUILT 91215 - TROY-BUILT...
244 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: