Question about Bakers Pride Y-600 Gas Single Oven

1 Answer

How to replace the thermostat on BP y-600

I need a procedure to replace the thermostat on BP y-600. The oven gets too hot, doesn't seem be controlled with temperature.

Posted by James Yu on

Ad

1 Answer

starztruck4u

  • Level 2:

    An expert who has achieved level 2 by getting 100 points
    MVP:

    An expert that got 5 achievements.
    New Friend:

    An expert that has 1 follower.
    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 77 Answers

Turn off gas supply. Open panel on left side. Loosen the top and bottom unions. Remove thermostat capillary line from the oven. Now remove thermostat with 2 pipe wrenches. install new thermostat and attach assembly to the unions you loosened. Now insert the capillary line back into the oven.

Posted on Feb 14, 2015

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0 Answers

Maytag CWE58000ACS also seems to get to a baking temperature but then loses the temperature very significantly. Cooking chicken usually is a joke. Any clue what is wrong with this oven?

Jan 10, 2017 | Maytag Ovens

0 Answers

Fan oven over heating

Dec 12, 2015 | Ovens

1 Answer

Oven temperature
have a service technician examine the oven and in particular the digital controlled thermostat
from what you describe the thermostat setting is not constant (loose connection etc) or faulty digital control unit

Nov 07, 2015 | Electrolux Ovens

0 Answers

I have a Whirlpool stove, model GS440LEMB. When I try to turn on the oven sometimes I will hear it "kicking on" and the oven becomes mildly warm but does not become hot. It cycles through the preheat...

Oct 09, 2013 | Whirlpool Ovens

1 Answer

I just moved into a house with a Gaggenau EB 846-6. Light and fan work. Heating element doesn't seem to work in top or bottom 'socket'. Also, neither heating indicator light illuminates
since neither light is going on, then i believe that you either have a bad thermostat, or possibly that you only have half of the voltage going to it, and gaggenau doesn't have gas units so it doesn't have a glow bar like the previous guy said.

Jul 21, 2012 | Ovens

1 Answer

Preway oven doesn't come to temperature
I Also have a wall oven by preway in a 1955 spartan trailer, basic same problem, I am told the control assembly that you turn to set temperature needs to be replaced, if it is adjusted to far on some part behind the controll knob it will screw up the new one also, Spencers appliance in Portland Oregon worked on mine years ago and was able to get parts, Good Luck

Feb 04, 2012 | Ovens

1 Answer

Zk5540 top oven not getting hot enough
it seems there's a thermostat problem. Probably need replacing.

Nov 24, 2011 | Zanussi Ovens

1 Answer

My Maytag MGR5750ADW oven will take forever to preheat. It does get hot, but the preheat light takes a very long time to go out. Food takes much longer to cook as the oven does not seem to get up to temp.
Hello there and welcome to fixya
When the food you're baking is done on top but not on the bottom--or when baking just takes far too long to finish--the bake element may be burned out. You may get fooled into thinking it's working, because the oven is hot inside. But many electric ovens use the broil element, too, during the preheat and bake cycles. So the food may be getting heated only by the broil element, which causes poor baking results. If the bake element is burned out, replacing it should solve the problem. To determine if the heating element is burned out, watch the part testing video at the bottom of this page. Otherwise, you need to further troubleshoot the oven's electrical system to locate the defective wire or component. When the temperature is consistent but too high or too low, it could be one of several different things. First check to see if the thermostat sensing bulb has come loose from its holder. It could be lying on the floor of the oven or resting on the heating element. This would cause the oven to not heat correctly. If the thermostat bulb is not dislodged, it's likely that the thermostat or sensor is either mis-calibrated or defective. Electronic ovens with a digital display use a sensor to monitor oven temperature. To solve temperature problems for these models, you may need to replace the sensor. On some digital-display models, you can calibrate the temperature using the key pad. See your operator's manual for details. Ovens without a digital display often use a mechanical system for controlling temperature. On many of these units, you can remove the thermostat knob and adjust the knob itself to more accurately represent the actual setting of the thermostat. If, when you remove the knob, there's a screw on the back of it with a small calibration plate, you can loosen the screw, adjust the plate, then tighten the screw again. If the knob isn't adjustable, and the oven temperature is off by more than 30 to 40 degrees, you need to replace the thermostat to solve the problem.

Aug 10, 2011 | Maytag Ovens

1 Answer

STOVE WORKS BUT OVEN WILL NOT HEAT UP - GAS OVEN
There are 2 high likelihoods as to what your problem may be. When you turn your oven on, does the ignitor begin to glow within 15 to 30 seconds? If it doesn't, there is no power going to the ignitor and the control mechanism is going to need to be replaced. If you have a manual dial thermostat control, you can order this on-line at parstdirect.com. If you control is electronic, you will be required to have an appliance technician come out in order to send the old controller in to be rebuilt.

If your ignitor is glowing when you turn on your oven, but it has a very dull orange glow, you have a bad ignitor and it needs to be replaced. This is the most common problem with older gas ovens. The ignitors just burn out after time and do not draw the amperage needed to open the safety valve.

Replacing the ignitor is a fairly easy procedure. Replacing a dial thermostat control can be a little rough due to rerouting the thermocoupler back through the oven body. Unfortunately, the electronic style oven controls can only be sent in for rebuilding and the company that you use will need to be able to handle "Retforrepr Rebuilds".

May 01, 2011 | Magic Chef 9122 Gas Single Oven

1 Answer

The oven wont get hot, it will warm up and the broiler seems to get hot??
You may get fooled into thinking it's working, because the oven is hot inside. But many electric ovens use the broil element, too, during the preheat and bake cycles. So the food may be getting heated only by the broil element, which causes poor baking results. If the bake element is burned out, replacing it should solve the problem. To determine if the heating element is burned out, you will have to test the element for resistance across the 2 ends , with the meter set on the 200 scale if you get a good reading like 000 it would indicate that the part may be ok but if yoiu get a reading of a 01 or a 1 or lomething like this it would indicate tha part is bad then you need to replace it
However you will also want to First check to see if the thermostat sensing bulb has come loose from its holder. It could be lying on the floor of the oven or resting on the heating element. This would cause the oven to not heat correctly. If the thermostat bulb is not dislodged, it's likely that the thermostat or sensor is either mis-calibrated or defective. Electronic ovens with a digital display use a sensor to monitor oven temperature. To solve temperature problems for these models, you may need to replace the sensor. On some digital-display models, you can calibrate the temperature using the key pad. See your operator's manual for details. Ovens without a digital display often use a mechanical system for controlling temperature. On many of these units, you can remove the thermostat knob and adjust the knob itself to more accurately represent the actual setting of the thermostat. If, when you remove the knob, there's a screw on the back of it with a small calibration plate, you can loosen the screw, adjust the plate, then tighten the screw again. If the knob isn't adjustable, and the oven temperature is off by more than 30 to 40 degrees, you need to replace the thermostat to solve the problem. It won't broil

Apr 11, 2011 | Frigidaire GLEB27S7A Electric Single Oven

Not finding what you are looking for?

View Most Popular

Y-600 Gas Single Oven

  • Ovens

Related Question

Maytag CWE58000ACS also seems to get to a baking temperature but then loses the temperature very significantly. Cooking chicken usually is a joke. Any clue what is wrong with this oven?

  • Maytag Ovens

Open Questions:

0 Answers

we have a surburban propane stove. we light the pilot light let it heat up turn on oven . it heats up to temp cuts off then oven won't relight and pilot is out

Jun 22, 2014 | Bakers Pride Y-600 Gas Single Oven

0 Answers

baker's pride 600 how to put in metal bricks

May 20, 2014 | Bakers Pride Y-600 Gas Single Oven

0 Answers

Bakers pride commercial oven flames turn on and then turns off won't stay lit

May 16, 2014 | Bakers Pride Y-600 Gas Single Oven

0 Answers

Y600 burning in one side

Mar 07, 2014 | Bakers Pride Y-600 Gas Single Oven

See all Bakers Pride Y-600 Gas Single Oven Questions

Related Topics

Bakers Pride Y-600 Gas Single Oven Logo

Related Topics:

273 people viewed this question

Ask a Question

Usually answered in minutes!

Popular Questions

Bakers Pride Y-600 Gas Single...

Bakers Pride FC-616 Gas Single...

Bakers Pride BAK-DS805 Gas...

Bakers Pride Y-600 Gas Single...

Bakers Pride FC-616 Gas Single...

Top Bakers Pride Ovens Experts

Paul Carew

Level 3 Expert

3534 Answers

David Spradling
David Spradling

Level 3 Expert

11960 Answers

Terry
Terry

Level 3 Expert

11377 Answers

Are you a Bakers Pride Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...