Why are my pictures coming out blurry or with a white cloud ?

Make sure lens are cleaned with PROPER solution and Special cloth.

If your pictures are blurry, you have a shutter speed that is too slow. If they are yellow, your white balance isn't set to auto. Try using the camera in more light or setting it to full auto. There is most likely nothing wrong with your camera.

Projection TV sets have several common problems listed below.

Problem #1) Convergence

Symptoms:

• Screen Looks 3D
• Colors wont align
• Screen may look distorted
• No Audio/Video - TV makes a chirping sound.

Problem #2 CRT Fluid has clouded over. Symtoms

• Dull looking video
• White looking video
• Halos around objects
• Red/Orange looking video

You can see some examples and find a fix here...

http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

This is a common problem. Its called a convergence failure.

Problem #1) Convergence

Symptoms:

• Screen Looks 3D
• Colors wont align
• Video may look distorted

Problem #2 CRT Fluid has clouded over. Symtoms

• Dull looking video
• White looking video
• Halos around objects
• Red/Orange looking video

You can see some examples and find a fix here...

http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Turn on your flash! Even in good lighting, shoot with the flash on. This will make your exposure shorter, and there will be less opportunity for movement of the camera or the subject to blur the photo.

THE IMAGE SENSOR OF YOUR CAM ARE HAVE A BURN SPOT

i think there may be some dead pixels.try to check it

If you are still getting sound but no picture then its a fair bet than when the tv was moved it was bumped about causing dry solder joints somewhere on the tv probably the line output stage. If you can re-solder the joints yourself try this first otherwise find a competant technician. Hope this helps.

This could be a CCD fault or possibly Lens damage. Not I would think something amenable to a sensible repair price- check Olympus first though.

Hello, please try to reset the camera and check your settings according the user manual. If you need more info please advice. Arpi