Question about Optics
How do i set my scope for my eyes
Are you looking set the eye relief or the focus ring?
For eye relief you need to loosen the scope in the rings, mount the rifle to your shoulder with your standard hold and cheek weld. At this point, slide the scope back and forth in the rings until you obtain a full field of view. Tighten one of the rings slightly, dismount and remount the rifle several times to ensure correct adjustment. Level scope and tighten rings a final time.
For focus adjustment (remember that you are using the eyepiece to focus on the cross hair, not your target!) loosen the lock ring and turn the eyepiece until the cross hair is focused. It is best if you check it several times by closing and opening your eye several times. The crosshair should be instantly in focus. If your eye must adjust, then you need to refocus until the focus is instant.
The two dials on the scope are for adjusting the bullet point of impact. They will typically move POI 1/4 inch at 100 yards.
Posted on May 31, 2010
What are the two dials for on the scope
Posted on Apr 12, 2008
Tips for a great answer:
Jun 02, 2011 | Tasco ProPoint Red Dot Matte Red/Green Dot...
Apr 26, 2011 | Tasco 1x25mm ProPoint Red Dot Scope
Apr 01, 2011 | Tasco ProPoint Red Dot Matte Red/Green Dot...
Jan 21, 2011 | Tasco ProPoint Red Dot Matte Red/Green Dot...
Dec 05, 2010 | Tasco PDP2 1x25mm Matte 5 MOA Dot
Nov 19, 2010 | Tasco ProPoint Red Dot Matte Red/Green Dot...
Sep 12, 2009 | Tasco Optics
Apr 11, 2009 | Tasco ProPoint Red Dot Matte Red/Green Dot...
Sep 22, 2008 | Computers & Internet
483 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: