Question about LG LHD45EL Dehumidifier
Posted by Anonymous on
Here is a tip that I wrote about that problem...
Posted on Apr 30, 2010
The switch that says 'Bucket is full' is not adjusted properly.
It will need to be adjusted, normally a screw driver or pliers,
so that when its empty the switch is not made or the contacts
If it is in adjustment properly, then the switch is bad and needs
Before you replace it, check to make sure the wires leading to it
are not touching, it may be sending a signal meaning 'full' by
electricaly touching each other at the switch.
Posted on Feb 25, 2011
The most common problem is that the humidity extraction level is set to high. Set it to it's lowest setting. If you have an LED screen on your unit, the lowest setting will probably be 35%. Or in the case of no LED screen, Minimal will be the setting you want to use.
Since you're using a drain hose, I assume the unit is in the basement. If that's the case, the ambient air temperature at floor level, may be to cold for the unit to operate properly. Most dehumidifiers struggle at air temperatures between 40 and 60 degrees F. Try placing the unit up off the floor on something sturdy that can handle the weight (including a full tank of water) and the vibration during operation.
Hope this helped you trouble shoot and solve the problem.Please let me know. Thanks.
Posted on Jun 01, 2011
Tips for a great answer:
Jun 02, 2014 | LG Dehumidifiers
Nov 13, 2013 | LG LD450EAL 45 Pint Dehumidifier
Jul 06, 2011 | LG LHD459EL Dehumidifier
Jun 25, 2011 | LG LHD45EL Dehumidifier
Jun 01, 2011 | LG Dehumidifiers
Apr 27, 2011 | LG Dehumidifiers
Feb 25, 2011 | LG Dehumidifiers
Jun 17, 2010 | LG LHD65EBL Dehumidifier
Feb 20, 2010 | LG LD40E Dehumidifier
175 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: