Kodak v1233 my camera wont take video or pictures

Replace the CCD (if you can find one.. They used to be plentiful and cheap - sub $20). Otherwise, you'll need to replace the lens assembly. The camera is modular, so most repairs you can do yourself. There are videos on disassembly on YouTube.

Hi,

Checkout this tip about digital camera error messages


Lens Errorfix for Digital Camera

heatman101;'
'
;

If your lens is broken, then there is no other alternative solution than to get a new lens for the camera. Because the Light for the picture has to come through the Lens which focuses it. If it is broken or malfunctioning, you will need to put in a new lens. Thank you

If the camera does not turn on then it can be a failure in the main control board and much cannot be done from the outside than to try a reset with the battery out for sometime.
If so you can open tocheck for some loose links, jammed drive or series fusible links/resistors.
If not the mP canbe faulty or the power circuit can be damaged with a wrong adapter or a reverse battery.( just a chance)

If it makes you feel any better, the airport screener cannot damage your camera in any way.

SAME HERE :(

there may be problem with the flash unit,better to contact kodak service.

The Easyshare Software cannot find the org. downloaded picture on C-Drive.
Right Klick on the picture and chose the connect to org. pic.
Find the org. picture and press enter.

Contact KODAK:
http://www.kodak.com/eknec/PageQuerier.jhtml?pq-path=14563&pq-locale=en_US&_requestid=3490

hi,
its a lance eror so keep servise well your lance , if you are a technition then try at home otherewise please contact authorised person , if you want to know more
don't wory its a lance problem, its beeing most probably so keep it up

Dear

Most probably your battery is low, if not then control circuit has been malfunctioned. Sorry