Question about Dyson Flowcheck CRO1 Front Load Washer

Open Question

Dyson cr01 flowchecker pics of belt postion

Picture of belt poisition,f11 fault

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
jonniewalker

Starnley Johnwells

  • 1031 Answers

SOURCE: dyson cro1 fault f11 came up after interupted power suply

normally error like this disappear when a hard reset is performed? did you leave the unit turned off by plugging out from wall power for one night ??

The F11 fault is a fuse blown on the circuit board.
Apparently this fuse failing can blow the board so you may have to change the board if needed. The board is located at the back of the machine so you need to take the back off, unplug the board, change the fuse which you can buy at Maplins and put the board back.
If it works fine, if not then you need a new board. Hope this helps you.
First make sure machine is turned off.
Second press & hold temperature button .
Thirdly press the on button & hold at the same time as the temperature button.
Fourthly release the 2 buttons at the same time .
Fifthly press the soil button .
Sixly turn machine off then back on & F11 message saying fault F11 must disappear.

if not try this process once again. if the error is not cleared then you will have to do as i have said you earlier.

Posted on Jan 18, 2009

Ad

Cary Crook

  • 105 Answers

SOURCE: how to repair a F 11 fault on a DYSON CR01 flow check

To Clear F11 Code after a power cut.

1, Power off at the machine. Do the next 4 steps within 3 seconds.
2, Press Temperature Button in.
3, Power on
4, Release temperature button
5, press Soil Type button

You will now hear the door lock release so you can get to your pants.

Diagnostic code is now displayed. You can switch the washer off and back on and the error code is clear. If you do this it will work.

Posted on Feb 10, 2009

taran_2005

taran_2005

  • 10515 Answers

SOURCE: how to repair a F 11 fault on a DYSON CR01 flow check

To Clear F11 Code after a power cut.

1, Power off at the machine. Do the next 4 steps within 3 seconds.
2, Press Temperature Button in.
3, Power on
4, Release temperature button
5, press Soil Type button

You will now hear the door lock release so you can get to your pants.

Diagnostic code is now displayed. You can switch the washer off and back on and the error code is clear. If you do this it will work.

Thanks for using Fixya.

Posted on May 28, 2009

GodBlessU

Aparajita Batabyal

  • 3513 Answers

SOURCE: f11 fault code

Hi,

Please find the steps that needs to be taken for trouble shooting F11 fault code specially if there was a power cut.

1, Power off at the machine. Do the next 4 steps within 3 seconds.
2, Press Temperature Button in.
3, Power on
4, Release temperature button
5, press Soil Type button

You will now hear the door lock release so you can get to your pants.

Diagnostic code is now displayed. You can switch the washer off and back on and the error code is clear. If you do this it will work.

I am sure it would help you to resolve the issue.

God Bless.

Posted on Jul 09, 2009

Anonymous

  • 4 Answers

SOURCE: how to repair a F 11 fault on a DYSON CR01 flow check

f11 fault code is a problem with the main power board (could be blown fuse) or a blown board check the fuse the board is behind the back plate in the bottem right corner (looking from the back of the machine.(!unplug before you take apart!)

Posted on Sep 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I HAVE FAULT F11 HOW DO I FIX IT


Dyson Memory CRO1 Front... Fault f11 Solutions - Fixya

www.fixya.com > ... > Dyson > Dyson Memory CRO1 Front Load Washer
Dyson Memory CRO1 Front Load Washer, fault f11 related issues. Get free help, solutions & advice from top Dyson experts.

Aug 08, 2015 | Dyson Flowcheck CRO1 Front Load Washer

1 Answer

Dyson cr01 f11 fault


Hi there,

I'm sorry to hear you're having difficulties with your Dyson Contrarotator. It's probably best if you get in touch with us directly, so one of our experts can run through some troubleshooting over the phone, and provide the information and assistance you need. You can call us free on 08002980298 - our Helpline is open from 7am until 10pm, 7 days a week. We'll look forward to hearing from you.

Kind regards,

Jack
Dyson Online Customer Support

Aug 26, 2011 | Dyson Flowcheck CRO1 Front Load Washer

1 Answer

Hi my dyson cr01 is showing a p900 fault could you tell me what this means ? Thanks Rob


Hi Rob,

Sorry to hear you're having difficulties with your CR01 Flowcheck. We don't recognise the error code you've provided, so it's probably best if you get in touch with us directly. One of our experts will be happy to run through some troubleshooting over the phone with you, and recommend the best course of action. You can call us free on 08002980298 - our Helpline is open from 7am until 10pm, 7 days a week. We'll look forward to hearing from you.

Kind regards,

Jack
Dyson Online Customer Support

Aug 13, 2011 | Dyson Flowcheck CRO1 Front Load Washer

1 Answer

Dyson CR01 - How to clear F8 - Overfilling : Turn Off Water?


Hi there,

Don't panic, simply call our Helpline free on 0800 298 0298. One of our advisors will be able to assist you!

Kind regards
Darran
Dyson Customer Service

Apr 07, 2010 | Dyson Flowcheck CRO1 Front Load Washer

1 Answer

F11 fault code


Hi,

Please find the steps that needs to be taken for trouble shooting F11 fault code specially if there was a power cut.

1, Power off at the machine. Do the next 4 steps within 3 seconds.
2, Press Temperature Button in.
3, Power on
4, Release temperature button
5, press Soil Type button

You will now hear the door lock release so you can get to your pants.

Diagnostic code is now displayed. You can switch the washer off and back on and the error code is clear. If you do this it will work.

I am sure it would help you to resolve the issue.

God Bless.

Jul 09, 2009 | Dyson Flowcheck CRO1 Front Load Washer

1 Answer

How to repair a F 11 fault on a DYSON CR01 flow check


f11 fault code is a problem with the main power board (could be blown fuse) or a blown board check the fuse the board is behind the back plate in the bottem right corner (looking from the back of the machine.(!unplug before you take apart!)

May 29, 2009 | Dyson Flowcheck CRO1 Front Load Washer

1 Answer

How to repair a F 11 fault on a DYSON CR01 flow check


To Clear F11 Code after a power cut.

1, Power off at the machine. Do the next 4 steps within 3 seconds.
2, Press Temperature Button in.
3, Power on
4, Release temperature button
5, press Soil Type button

You will now hear the door lock release so you can get to your pants.

Diagnostic code is now displayed. You can switch the washer off and back on and the error code is clear. If you do this it will work.

Thanks for using Fixya.

May 28, 2009 | Dyson Flowcheck CRO1 Front Load Washer

2 Answers

Dyson cro1 fault f11 came up after interupted power suply


normally error like this disappear when a hard reset is performed? did you leave the unit turned off by plugging out from wall power for one night ??

The F11 fault is a fuse blown on the circuit board.
Apparently this fuse failing can blow the board so you may have to change the board if needed. The board is located at the back of the machine so you need to take the back off, unplug the board, change the fuse which you can buy at Maplins and put the board back.
If it works fine, if not then you need a new board. Hope this helps you.
First make sure machine is turned off.
Second press & hold temperature button .
Thirdly press the on button & hold at the same time as the temperature button.
Fourthly release the 2 buttons at the same time .
Fifthly press the soil button .
Sixly turn machine off then back on & F11 message saying fault F11 must disappear.

if not try this process once again. if the error is not cleared then you will have to do as i have said you earlier.

Jan 18, 2009 | Dyson Flowcheck CRO1 Front Load Washer

1 Answer

How to repair a F 11 fault on a DYSON CR01 flow check


To Clear F11 Code after a power cut.

1, Power off at the machine. Do the next 4 steps within 3 seconds.
2, Press Temperature Button in.
3, Power on
4, Release temperature button
5, press Soil Type button

You will now hear the door lock release so you can get to your pants.

Diagnostic code is now displayed. You can switch the washer off and back on and the error code is clear. If you do this it will work.

Oct 22, 2008 | Dyson Flowcheck CRO1 Front Load Washer

Not finding what you are looking for?
Dyson Flowcheck CRO1 Front Load Washer Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dyson Washing Machines Experts

Brad Brown

Level 3 Expert

18157 Answers

Sheldon Dedek

Level 3 Expert

909 Answers

jimorris77

Level 3 Expert

411 Answers

Are you a Dyson Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...