I have fuzion rogue -650 digital pocket scales but someone played with them and calibrated it wrong so now is not weighing right. How do I fix this problem without calibration weights?

Unlikely that _you_ can. It is normally a factory feature. Depending on the use of the scale it has to be calibrated against a Government certified weight under laboratory conditions.

Contact them and ask
https://www.liden-weighing.se/en/
Support

Technical support

Tel: +46 322 442 00Mail: [email protected]

..

Idk

I have a fuzion tank digital scale and need to recalibrate it and I don't have the weight what else can I do

Try THIS on for size!...

How to Calibrate Fuzion Digital Scales Hunker

and THIS YOUTUBE VIDEO!

Episode 1 How to calibrate your Fuzion Scale english version

Good luck!
Anthony

are you sure the batteries are good. double check it again with known good batteries.

What model? Could be the battery need to be changed.

at
http://www.tobaccogeneral.com/accur8-355-mnf.htm
tobacco is selling out their accura8

Calibrating a digital pocket scale like the Mega Weigh MGP-1014 ensures that it provides accurate measurements. Here are the general steps for calibrating such a scale:
Note: It's important to refer to your scale's user manual for specific instructions, as calibration methods can vary between different models.
What You'll Need:

• Calibration weights (these are weights with known, precise values)
• The Mega Weigh MGP-1014 scale
• A clean, stable surface for calibration

Steps:

1. Read the Manual: Familiarize yourself with the user manual that came with the scale. It should provide specific instructions on how to calibrate the scale.
2. Clean the Scale: Ensure that the scale's weighing platform is clean and free from any debris. This helps to prevent interference with the calibration process.
3. Power On: Turn on the scale and wait for it to stabilize, displaying "0.0" or the default reading.
4. Tare (Optional): If your scale has a tare function, you can use it to zero out the weight of any container you plan to use to hold the calibration weights. Place the empty container on the scale and press the tare button.
5. Select Calibration Mode: Many scales have a calibration mode that you need to access. Refer to your user manual to determine how to enter the calibration mode on the Mega Weigh MGP-1014.
6. Add Calibration Weight: Place a calibration weight of a known value onto the scale's platform. The weight should match the unit of measurement you plan to use (grams, ounces, etc.).
7. Calibration Procedure: Follow the specific instructions provided in the user manual to initiate the calibration procedure. This usually involves pressing buttons or following on-screen prompts. The scale will often ask you to confirm the weight value of the calibration weight you added.
8. Confirm or Adjust: The scale should display the weight you added as the calibration weight. Confirm that the displayed weight matches the known value of the calibration weight. If there's a discrepancy, follow the manual's instructions to adjust the calibration setting accordingly.
9. Repeat if Necessary: Some scales require calibration with multiple weights to ensure accuracy across the scale's entire range. If this is the case, follow the manual's instructions for using additional calibration weights.
10. Exit Calibration Mode: Once you've completed the calibration procedure, exit the calibration mode according to the instructions provided in the user manual.
11. Test with Known Items: After calibration, test the scale's accuracy by weighing objects of known weight to ensure that it's providing accurate readings.

Remember that the exact calibration process can vary depending on the scale model, so always refer to the user manual for the most accurate instructions. If you're unsure about any step, it's recommended to contact the manufacturer's customer support for assistance.

magnum 1000xr pocket scales turns on calibrates goes to different modes but wont show the weight when object placed on the scale,a lock appears in top left of window, is scales broke or do i have to make lock symble dissappear?