At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Your DVD player does not recognize the format that is put into the disc and so does not read.
When it is put into the PC , it might ask for formatting but is not possible when it is a only read disc.
So check the format you have recorded to be acceptable to the player .
Here you go...I hope this works for you....
CD/DVD Is Not Recognized
Many times, after inserting a disc into the CD or DVD drive, the disc is not recognized by that drive. CD-read and DVD-read issues can be caused by many sources. Perform the procedures presented in this General Computer Advice article when troubleshooting CD-read and DVD-read issues.
Begin with the first procedure and continue through the list. Try using the CD or DVD after each procedure is completed. For any procedure that requires changing current system settings, record the original settings before completing the procedure.
Verify that the correct disc (CD/DVD) is used when prompted to insert the disc.
For programs on DVD, verify that the drive containing the DVD is a DVD drive and not a CD-ROM drive. Most DVD drives will haveDVD printed on the front of the drive. For programs on DVD, consider the following:
DVD drives can read both DVD's and CD's.
CD-ROM drives can read only CD's.
If multiple disc drives (e.g., CD-ROM and CD-RW, or DVD and DVD-RW, or CD-ROM and DVD-RW, etc.) exist on the computer that can read the disc (refer to the items under Step 2), insert the CD or DVD into the other drive and try the program again.
If you are attempting to install a program and the installation does not begin after inserting the CD/DVD into the proper drive, refer to the program's instructions for the installation procedure.
Clean the CD/DVD in the following manner:
Place a small amount of nonabrasive liquid soap on the shiny side of the CD/DVD.
Using your fingertips and warm water, gently rub the soap on the CD/DVD in a circular motion.
Rinse the CD/DVD thoroughly and dry it using a clean, soft T-shirt or lint-free towel. (Do not use paper towels or tissue paper.)
Try to use a different CD or DVD in the drive to see if that disc can be read.
If possible, insert the problem CD or DVD into the DVD or CD drive of another computer to see if the issue persists.
CD-RW drives can only read all CD-rom and CD-RW formats and read DVD formats but cannot write to a DVD, if you want to write a DVDs you need to buy a DVD-RW burner which can burn all CD-formats
if you have nothing on the cd then it won't read it cause there is nothing for it to read... so if you have a writing software that you can write the cd you can write the cd... only if there is something on the cd it will read......
×