Where is the motorcontrolcircuit located bosch logixx8

Motor carbon brushes burned out and needs to be replaced. You can YouTube the procedure and do it yourself or call a service center and tell them you know precisely was wrong with it and how much to replace the parts and labor. It's a. 45-60 job
good luck

Go to manufactures online site select user manual eric992

Either the tub seal is leaking or a drain hose is leaking.

go to bosch web site will need the enr no

Press and hold the start button until the child lock turns off.

F:80 Turn the power plug 180 dgr.

Open the service flap, bottom right corner, and clean the pump.
That should do the trick

I have Logixx8 WAS 32782 that got the f-67 code. I had it repaired today and the technichan updated the software. f-67 was indicating "lost contact with display panel". The display panel had of some reason erased its software. SW update was the standard solution.

take the clothes out and push the button on

The child lock on my Bosch Logixx8 washer has come on and i need to disable it