2 Answers
SDTV REMOTE CODES FOR MAGNAVOX
Hi
On the URC 4330 model the Magnavox brand is not listed in the code index.
Therefore, you should be aware that this remote may not have code stored in its pre-programmed library to allow it to operate Magnavox.
There is a code search function with this remote and this is your only other option in a situation such as this.
TO SEARCH FOR YOUR CODE FOR YOUR TV
1. On the remote control, press TV once.
2. Press and hold SET until the LED blinks twice, then release SET.
3. Enter 9 - 9 - 1.The LED will blink twice.
4. Aim the remote control at the TV and slowly alternate between pressing POWER and TV. Stop when the TV turns off.
NOTE: In the search mode, the remote control will send IR codes from its library to the selected device, starting with the most popular code first so this may take some time to complete.
5.Once you find the point at which the remote operates the TV press and hold SET until the LED blinks twice, then release SET. This locks in the code.
As I say - the remote may or may not compatible with Magnavox. However this search function is there to use in situations such as this.
Hope this helps. Thanks for using FixYa.
Jan 09, 2010 |
One For All URC-4330 Remote Control
×