Question about HP OfficeJet 6210 All-In-One InkJet Printer

Open Question

Where do I find printer access door

I have install new print cartridges and its asking me to close print access doors. I never has this error before.

Posted by Anonymous on

Ad

5 Related Answers

Anonymous

  • 6 Answers

SOURCE: Says printer cartridge access door open when closed

No it will not complain for an open door if there is no cartridge. There will be a separate warning for no cartridge or toner not installed error. You might want to play around with the cartridge door a little and see for a possible paper stuck somewhere inside.

Posted on Jul 27, 2007

Ad

Anonymous

  • 2985 Answers

SOURCE: Error - "Close cartidge access door"

By a door edge or  on  a hong extention
Look for a wire going to the the closing edge near thge latch or to a hinge- one of the hinged may have a curved arm  going to a micro switch buried near by

Posted on Oct 22, 2007

Ad
geemarie

Gayle Ashbach

  • 876 Answers

SOURCE: Print Access Door?

Dis you put any packaging in the printer to protect it? Just make sure that there is nothing unusual under the lid.

Posted on Aug 16, 2008

Thomas F. Schneider

  • 2715 Answers

SOURCE: Warning light: Close print cartridge access door

It coudl be the document feed cover. The door on the rear or any part that can be opened and closed.  See paper jam in trouble shooting section of your manual. It shows several thing being moved.
Link to manual below:
http://h10025.www1.hp.com/ewfrf/wc/product?product=421991&lc=en&cc=us&dlc=en&submit.y=6&submit.x=3〈=en&cc=us

Posted on Mar 18, 2009

Norman Al-Anbar

  • 630 Answers

SOURCE: close print cartridge access door. It is closed

try to use a pin to click on the switch for the door and see it may be not working

Posted on Nov 08, 2009

Testimonial: "Yes, this is the problem. The notch on the door needed to be very carefully bent to engage all the way. How long should the align cartridge take?"

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

10.1002 supply error


This error indicate the affected cartridge...
10.1002 = Magenta e-label is missing..
you need to reinstall the printer..

Are you sure that the print cartridges are genuine!!
->Open the front access door completely.
->Press the blue handle on the print cartridge drawer to release it, and then pull the drawer out completely.
->Grasp the center of one of the print cartridges, and then pull it straight up to remove it.
->Hold the print cartridge so that the imaging drum faces the bottom of the print cartridge drawer, and then insert the print cartridge into the correct slot.
->When you are sure that you have genuine print cartridges installed, close the print cartridge drawer completely.
->Close the front access door completely.


If you need any kind of technical assistance you can contact support cell at http://www.vtechsquad.com/

Dec 26, 2012 | Office Equipment & Supplies

1 Answer

Installation of cartridges correctly


Follow these steps to install the printer cartridge :
•1
Make sure the HP printer is turned on. Open the print carriage access door. Wait for the carriage to stop moving.
•2
Remove the old cartridge from the print carriage.
•3
Remove the new print cartridge from its packaging. Being careful to touch only the black plastic, gently remove the plastic tape by using the pull tabs. Make sure you've removed all of the tape.
•4
Slide the new print cartridge into the empty slot in the print carriage. Push the print cartridge forward until it clicks into place. Press down on the latch until it is securely closed.
•5
Close the print-carriage access door. Print a test page to make sure your new cartridge is properly aligned.

Oct 20, 2010 | HP Photosmart C4150 All-In-One InkJet...

1 Answer

I have a phillips ipf525 could you show me how to set up


According to the user guide, the problem you're experiencing could be due to the following:

Print cartridge access door might be open.
• Close the access door.

Print cartridges might be missing or not installed properly.
• Re-insert the print cartridges and make sure they are properly seated.

There might be a problem with the print cartridge.
• Close the access door. If the light continues to blink, one of the print cartridges is defective.

Do the following:
1) Remove the black (or photo) print cartridge.
2) Close the access door.

If the "check print cartridge" light blinks, the tri-color print cartridge is defective and must be replaced.

If the light does not blink, the black (or photo cartridge) is defective.

In all probability, the contacts on the contact ribbon are not connecting properly. Take a common pencil eraser and rub lightly across the contacts on the ribbon to remove any contaminants or debris.

Check the contacts inside the cartridge carrier to ensure that they're not dirty, bent or broken.

You should also inspect the carrier itself. If the plastic frame is cracked or broken and the cartridge can wobble around, it will usually install without any trouble but when you close the access door the carriage immediately moves back into print-ready position. The cartridge will shift and break its' connection. This will cause these types of errors as well.

If it's cracked or broken, go and get a new printer.

Jun 13, 2010 | Office Equipment & Supplies

1 Answer

Check print cartridge blinking cartridges refilled today and installed laptop not recognising printer as result


    • If the message on the computer does not identify a particular cartridge (it says only Print cartridge error ), follow the steps below to determine which cartridge is causing the problem.
      1. Open the cartridge access door.
      2. Remove either cartridge (not both).
      3. Close the cartridge access door.
        • If the computer message is Print Cartridge Error , then the print cartridge that is still in the printer is the problem cartridge.
        • If the computer message is NOT Print Cartridge Error (instead, it says that the cartridge you have removed is ...Either missing, not detected, or incorrectly installed), then the cartridge you have removed is the problem cartridge.

  • If the problem still occurs, the electrical contact between the cartridges and the printer might be bad. Removing and reseating the cartridges might help. Also, you can clean the electric contacts on the cartridges with a dry cloth.
Hope that will help solve your problem!

Jan 16, 2010 | HP PSC 1205 InkJet Printer

1 Answer

Close print cartridge access door. It is closed


try to use a pin to click on the switch for the door and see it may be not working

Nov 08, 2009 | HP OfficeJet J4580 All-In-One Laser...

2 Answers

I have a kodak 5500 aio printer. I replaced the


Try the following:

1. Open the printer access door.
2. Put out both ink cartridges and the printhead.
3. Let the printer access door open.
4. Put out all paper.
5. Pull out the ac adapter at the back of the printer.
6. Wait 60 sec.
7. Pull in AC adapter.
8. Wait 30 sec. then turn on the printer
9: Wait for the error message: Printer access door open.
10. Close the printer access door.
11. Wait for the error message: Printhead is missing.
12. Open the access door and put in only the printhead and the close the access door.
13. Wait for the error message: both ink cartridges are missing.
14. Open access door, put in only the black ink cartridge, then close the acess door.
15. Wait for the error message: Color ink cartridge is missing.
16. Open access door, put in the color ink cartridge and then close the access door.

If the error is solved, do a firmwareupdate right now.

You can find it here.

Sep 22, 2009 | Kodak EASYSHARE 5500 All-In-One InkJet...

1 Answer

We purchased a new cartridge because it said install new ink cartridge,we installed new cartridge it still says install new ink cartridge and will not receive or send faxes


it will not send or receive a fax if the error is still there. Clear the error by trying these steps:
-open cartridge door and remove the cartridge
-unplug the power cord at the back of printer
-after 30 seconds, plug the cord and turn on the printer. It will ask for the cartridge.
-Open the cartridge door and insert the cartridge
-close the access door
-if the error is cleared, try faxing again.

I hope this helps.

Regards,

Mar 02, 2009 | HP 640 Inkjet Fax Machine

2 Answers

Error message: "Door Open"


HI there,
Follow the steps below:
Step one: Close the print cartridge access door
1.Verify that the print cartridge access door is completely closed. It may appear to be closed, but if it is not completely closed, the error message will display. Verify that there are no obstructions blocking the door.
2.If you are unsure how to close the print cartridge access door on your model, consult your User Guide for more information.
Figure 1: Examples of closing the print cartridge access door (your model may vary)
f3e57be.gif If you have attempted to completely close the access door and the error still appears, there may be a problem with the door sensor and the unit may require service.

Step two: Service your product
If you have completed all the steps listed above and are still experiencing a problem, service the product.

Good Luck!!!

neo

Feb 28, 2009 | HP OfficeJet Pro L7580 Color All-in-One...

2 Answers

5300 kodak eazyshare printer


Well, here is the proper way of fixing or troubleshooting that paper jam error in your printer

Open the printer access door and remove both of the ink cartridge, then remove also the printhead, after that close the printer access door, without those parts. Then it will show a message in the printer screen, "Printhead is missing or has come loose" or "Printhead Not Detected" Install the printhead, just the printhead without the ink cartridges. After that close the printer access door. Then it will show you a message"Ink cartridges is not installed,install ink cartridges". then open again the printer access door, then install the black ink cartridge without the color ink cartridge. then close the printer access door, then message must be " Color ink cartridge is not installed, install color ink cartridge" then install the color ink cartridge." the message must be,"New printhead is detected calibration require, load paper and press start"

Thats the way of overiding the paper jam error message of your kodak all in one printer
hope this will help you guys

by: E.brown

Happy Printing(", )
Kodak AIO tech support 1-800-421-6699

Jun 04, 2008 | Kodak EASYSHARE 5500 All-In-One InkJet...

1 Answer

Says printer cartridge access door open when closed


No it will not complain for an open door if there is no cartridge. There will be a separate warning for no cartridge or toner not installed error. You might want to play around with the cartridge door a little and see for a possible paper stuck somewhere inside.

Apr 26, 2007 | HP PSC 2110 All-In-One InkJet Printer

Not finding what you are looking for?
HP OfficeJet 6210 All-In-One InkJet Printer Logo

Related Topics:

79 views

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

efs_perpends
efs_perpends

Level 3 Expert

1997 Answers

Cindy Wells

Level 3 Expert

6259 Answers

k24674

Level 3 Expert

8092 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...