- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
ebay or craigslist find a broken dryer for sale near you. I just replaced one of my customer old kenmore parts NLA I found it on craigslit $35. Just a suggestion cheers!
is the drum turning?if the drum is ok sounds like the thermo fuse on the heater box failed,most of the time it's from a clogged dryer vent hose or wall vent,let me know what you find-mike
Had the same problem on a whirpool drayer. Get our multimeter and check which
heat fuse is broken. Take that one out and throw it in the floor until you have
conductivity again. Clean drayer vents and heater. This worked for me, good
luck. http://www.youtube.com/watch?v=UuFQOuSlzlw
Can be a few things. Start by resetting your circuit breaker. The dryer motor can run with partial power but the heating element cannot. Make sure your not set to a no heat setting. After those checks you have to get into the mchine to check your heating element and thermostats.
No heat may mean that one side of the 240 volt circuit breaker is tripped or one fuse of the 240v circuit at the fuse/breaker box is tripped. Just replace/reset the fuse or breaker which ever you have. Dryers will have controls working but not heat if it happens to be that particular side of the 240v circuit that tripped or fuse burned.
×