Question about Frigidaire Affinity ATF7000E Front Load Washer
Posted by Anonymous on
IT IS THE DOOR LOCK ASSEMBLY, COST AROUND $50.00 WHICH IS FAR BETTER THAN $300.00, WHAT A SERVICE REPAIR PERSON WILL CHARGE YOU. YEA IT'S THE CRAZIEST THING IMAGINABLE, THE DOOR LOCK ASSEMBLY BEING THE CAUSE FOR IT TO NOT SPIN ALL THE WATER OUT. I FIXED MINE MYSELF, HAD TO TAKE IT ALL APART VERY CAREFULLY, BUT I SAVED MYSELF $250.00. YOU CAN GET THE PART ONLINE OR GO TO NEAREST APPLIANCE PARTS STORE IN YOUR CITY. ASK FOR DOOR LOCK ASSEMBLY. THEY WILL KNOW EXACTLY WHAT YOU'RE TALKING ABOUT BECAUSE IT IS A VERY COMMON, I REPEAT VERY COMMON PROBLEM WITH THIS BRAND OF WASHING MACHINE.
Posted on Aug 12, 2008
SOURCE: Final Spin Cycle Not Working
I unclogged the pump, it was really easy, and it fixed my problem (I have no mechanical know how)! let me explain how I did it! I have the Frigidaire Front loader for two years, it was acting funny, wouldn't spin, wouldn't drain. My solution was quick and simple, per a solution already mentioned on this site. In short, The rubber drain was clogged. There were two cotton breast pads, that must have been in there for months. Recently my washing machine would not drain, and therefore wouldn't even think about spinning fast. To unclog, first take off the front bottom panel. (There are two tight screws on the front bottom, next to the floor, I had to use a powerdrill to remove them, and tilt the machine against the wall to get to them). Next, there was a black rubber accordian on the front right, where the water drains. (remeber to unplug your washing machine, to avoid any shock or such!) I simply unscrewed the big metal ring, (I think it's called a gasket). After unscrewing the metal ring, I could easily pull the rubber accordian down 2 inches, stick my hand in it, and pull out debris. I pulled out debris for about 5 minutes, and was so excited because I knew my washer would work great again. I simply put the rubber accordian part back on the lip, screwed the ring piece pretty tight. I used a towel to absorb a small amount of water, that got inside the washing machine. Now, it is spinning a million miles per hour again. I will put the rectangular bottom front panel back on in a few days, I just want to double check, there is no leak, which there is no reason to suspect, as removing and putting the metal ring back on was easy!.
Posted on Dec 24, 2008
Tips for a great answer:
Aug 04, 2017 | GE WBSE3120B Top Load Washer
Mar 22, 2011 | Kenmore Elite 45986 Front Load Washer
Oct 07, 2009 | Fisher and Paykel GWL11 Top Load Washer
Oct 23, 2008 | Kenmore 22422 Top Load Washer
Dec 29, 2007 | Washing Machines
Dec 19, 2014 | Frigidaire Affinity ATF7000E Front Load...
112 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: