WHERE IS THE MPTRAY

Most probabply will also say Please put paper in the MP tray ?

paper sensor is broken call copier tech

The switch that says that the paper is out is stuck or misaligned.

This error means that either the physical paper tray and copier setting dos not match up with one another. For instance, if the tray 2 is set to letter and the copier is set to legal on tray 2, then there will be a discrepancy and cause an error. Ensure that both the tray and copier are set to the correct size.

-David.

which tray is paper in? the MP tray is the manual bypass tray in front of machine. sounds like your software is setup to utilize the MP tray for the labels, which is the best thing to do.

hth
razors

There should be a separate manual to cover the fax function in the machine. You can download one at Ricoh.com

call a service center and have a service tech install the latest firmware... and also have him tune the paper settings.... thats your best bet...

I’m happy to assist further over the phone at https://www.6ya.com/expert/norman_d2fa496dce30c65d

The bypass tray is refered to as the multi-purpose (MP) tray. It is located vertically on top at the back of the fax machine. The fax needs to be programmed (told what size of paper is loaded) by opening the One-Touch Speed Dialing panel, press the 'Data Registration' button, press 'Set' button, then using up or down arrows to select " 5.PRINTER SETTINGS ". Press 'Set' button, then press down arrow to display " 2.PAPER SIZE ". Press 'Set', use arrow s to select CASSETTE or MP TRAY. Use arrows to select appropriate size of paper loaded. Press 'Set'. Press 'Stop' button to return to standby mode. Reference pages 15-11 and 15-12 in LC 2050 Users Guide.

please print option paper source setup mp tray and setup page size then solve your problem
mp tray is copier front side open it and insert paper or print source lower casset
i pray you wiil success

Remove the tray out of the copier and look for one next to the feed tires.