Question about Jabra BT160 Wireless Headset

3 Answers

My Jabra BT160 won't connect to my Nokia 6103 why?

I[ve tried to connect my Bluetooth to my Nokia 6103 but no use the phone searches and come back with "no devices found"

Posted by shelley63108 on

  • 3 more comments 
  • maddawg Nov 17, 2007

    I press the + and the on button at same time and solid blue light won't come on

  • jokestr2003 Nov 28, 2007

    My bluetooth earpiece is on but my Nokia 6103 doesnt detect it when it searches for audio enhancements.



    It always says "No devices found" and I dont know why. Help :[

  • shelley63108 Jan 03, 2008

    I figured this out on my own you have to hold the bluetooth down while your phone searches it will find the bluetooth and connect.

  • Anonymous Mar 19, 2008

    whaat is the passcode

  • Raffa42 Apr 15, 2008

    well I have a Jabra bt160 and I,ve try to connect it to my t mobile dash cell,and all I got is "no divices were found", please help

×

Ad

3 Answers

Anonymous

Try what Shelley says above...hold down the button while you search on your phone. It was the only thing I could get to work with my Jabra and Nokia phone.

Posted on Jul 02, 2008

Ad

Anonymous

Hold the on/off button and the + button for 2 min. If you fail at the first time. Try again, until you see the blue solid light. Search again in your phone, you should see Jabra bt160. Enter 0000 at the passcode. Good luck

Posted on Jun 22, 2008

Ad

Anonymous

My nokia does not connect to bluetooth headset...it says "no device found. please help.

Posted on Jan 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can not get the headset to turn on.


If I read everything correctly in the manual I believe the light only stays on when the device is in the pairing mode. If the light flashes every second, the headset is on a call, if the light flashed every three seconds, it is in standby mode.
Standby mode: is when the Jabra BT160 is passively waiting for a call. When you 'end' a call on your mobile phone, the headset goes into standby mode.

Make sure your phone is bluetooth equipped.

You must first successfully pair the headset with your phone. The manual shows you how.....
1. Put the headset in pairing mode Make sure that the headset is on. Press the answer/end button and press the volume up (+) button at the same time, until a solid blue light comes on.
2. Set your Bluetooth phone to 'discover' the Jabra BT160 Follow your phone's instruction guide. This usually involves going to a 'setup,' 'connect' or 'Bluetooth' menu on your phone and selecting the option to 'discover' or 'add' a Bluetooth device.
3. Your phone will find the Jabra BT160 Your phone then asks if you want to pair with it. Accept by pressing 'Yes' or 'OK' on the phone and confirm with the passkey or PIN3 = 0000 (4 zeros). Your phone will confirm when pairing is complete. In case of unsuccessful pairing, repeat steps 1 to 3.

Go here for a copy of the owners manual....
http://www.mainresource.com/PDFs/GNBT160User.pdf

Hope this helps.....

Jan 27, 2018 | Jabra BT160 Wireless Headset

1 Answer

How do you put the device into discovery mode


Before you use your Jabra BT160, you need to pair it with your mobile phone. 1. Put the headsetin pairing2 mode Make sure that the headset is on. Press the answer/endbutton and press the volume up (+) button at the same time, until asolid blue light comes on. 2. Set your Bluetooth phoneto ?discover? the Jabra BT160 Follow your phone?s instruction guide.This usually involves going to a ?setup,? ?connect? or ?Bluetooth? menuon your phone and selecting the option to ?discover? or ?add? aBluetooth device 3. Your phone will find the Jabra BT160 Your phonethen asks if you want to pair with it. Accept by pressing ?Yes? or ?OK?on the phone and confirm with the passkey or PIN3 = 0000 (4 zeros).Your phone will confirm when pairing is complete. In case ofunsuccessful pairing, repeat steps 1 to 3.

USER GUIDE

Jan 03, 2010 | Jabra COMMUNICATIONS BT160 Bluetooth...

1 Answer

I do not have manual for jabra bt160 how do i connect to phone


Wear it how you like it 4
5
English
The Jabra BT160 is ready to wear on your right ear. If you prefer the left, gently flip and
rotate the earhook 180°. (See fig. 2 )
For optimal performance,wear the Jabra BT160 and your mobile phone on the same side
of your body or within line of sight.In general,you will get better performance when
there are no obstructions between your headset and your mobile phone.(See fig.5 )
Answer a call
Tap the answer/eend button on your headset to answer a call
End a call
Tap the answer/eend button to end an active call
Reject a call (DDependent on your phone supporting this feature)
Press the answer/eend button when the phone rings to reject an incoming call.
Depending on your phone settings, the person who called you will either be
forwarded to your voice mail or hear a busy signal
Make a call
• When you make a call from your mobile phone, the call will (ssubject to phone
settings) automatically transfer to your headset
Activate voice dialing (DDependent on your phone supporting this feature)
Tap the answer/eend button. For best results, record the voice-dialing tag through
your headset. Please consult your phone ’ s user manual for more information about
using this feature
Redial last number (DDependent on your phone supporting this feature)
Press the answer/eend button
Adjust sound and volume
Press the volume up or down (+or – ) to adjust the volume (See fig. 1 )
How to...5
Before you use your Jabra BT160, you need to pair it with your mobile phone.
1. Put the headset in pairing 2 mode
Make sure that the headset is on.
Press the answer/eend button and press the volume up (+) button at the same time,
until a solid blue light comes on.
2. Set your Bluetooth phone to ‘ discover ’ the Jabra BT160
Follow your phone ’ s instruction guide. This usually involves going to a ‘ setup,’
‘ connect ’ or ‘B luetooth ’ menu on your phone and selecting the option to ‘ discover ’
or ‘ add ’ a Bluetooth device.** (See example from a typical mobile phone in fig. 4 )
Pair it with your phone 3
4
English
Turn on your headset 2
Press the answer/eend button to turn on your headset
Press and hold the answer/eend button to turn off your headset
Charge your headset
Make sure that your Jabra BT160 headset is fully charged before you start using it. Use
the AC adaptor to charge from a power socket. Connect your headset as shown in fig. 3.
When the LED is solid blue, your headset is charging. When the solid blue LED turns off,
it is fully charged.
1
The Jabra BT160 is easy to operate. The answer/eend button on the headset performs
different functions depending on how long you press it.
Instruction:Duration of press:
Tap Press briefly
Press Approx: 1 second
Press and hold Approx: 5 seconds
Getting started
3. Your phone will find the Jabra BT160
Your phone then asks if you want to pair with it. Accept by pressing ‘ Yes ’ or ‘ OK ’ on
the phone and confirm with the passkey or PIN 3 = 0000 (44 zeros).
Your phone will confirm when pairing is complete. In case of unsuccessful pairing,
repeat steps 1 to 3.

http://www.jabra.com/Sites/Jabra/UK-uk/support/Pages/JabraBT160.aspx

It is all in there www.jabra.com

ARTGIRL

Jul 18, 2008 | Lands Phones

2 Answers

My jabra BT160 is not getting connected to my nokia 7610 when ever i search for the device the results r no device found.


hold down the front button and your + volume key for 3-5 sec. that should put it in pairing mode.

Jun 04, 2008 | Jabra BT160 Wireless Headset

1 Answer

BT160 connect problems


Hi,
while your in the phones bluetooth manager/program and searching for the device. press the bluetooths buttons to enable the 2 to syncronise. if you press the up/down volume buttons while searching with the phone, it should find it, and syncronise. by pressing different buttons, your giving the phone a chance to detect a bluetooth signal change, and receive the device.

Mike @ compurepair.

Apr 01, 2008 | Jabra COMMUNICATIONS BT160 Bluetooth...

1 Answer

Jabra BT160


The default Jabra password seems to be 0000

Give it a try - it may work

Good luck

Feb 25, 2008 | Jabra COMMUNICATIONS BT160 Bluetooth...

1 Answer

Connecting to phone


You need to put Jabra in Discovery Mode. Press the "Volume up" and the "Power" button at the same time continuosly while you have your Razr in the add Bluetooth mode. Once they meet you will be asked to pair, concur. Then you wilkl be asked for a passkey.. The universal code is "0000" (4 zero's).

This should get you in and working.

Nov 09, 2007 | Jabra BT160 Wireless Headset

2 Answers

Jabra bt160


hold the button down for a long time

Apr 17, 2007 | Jabra COMMUNICATIONS BT160 Bluetooth...

Not finding what you are looking for?
Jabra BT160 Wireless Headset Logo

1,658 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jabra Radio Communications Experts

Anthony Ward
Anthony Ward

Level 2 Expert

397 Answers

Mosaub Al Masri
Mosaub Al Masri

Level 2 Expert

66 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Jabra Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...