5250 kod how i can reset the code 3527 kodak machine

Please follow the below link to the Kodak website for this code:
Printhead carriage jam or all in one printer error code 3515 3525 3527...

http://support.en.kodak.com/app/answers/detail/a_id/1720/~/error%3A-printer-error-%283806,-3807,-3808,-3809,-3810,-or-3811%29/selected/true

To resolve this error:

1. Disconnect the power adapter from the printer.
2. Wait 30 seconds to allow the printer to reset.
3. Connect the power adapter to the printer. Turn on the printer, if necessary.

If the error continues:

1. Open the printer access door.
2. Remove and install the printhead two times.
3. Close the printer access door.
4. Wait until the printer is ready to use.
5. If the error is displayed, contact http://support.en.kodak.com/app/contact/src/gocontact/selected/true

It all depends on who made the product. There are often times simple solutions but they need to be found by searching on the web and talking to service people about the unit. Some print head motors were known to fail or develop bearing noise over time in the HP line. Many of these things are really not prone to be fixed as the repair cost is sometimes the same as a new unit.
I would contact the warranty center- even if out of warranty and see if you could talk to a technician to start.

Hi friends,
I was able to solve this problem (error code 3527 on Kodak hero 9.1) by opening the printer entirely (dis-assembled), Checking the cartridge carriage assembly, i discovered that the belt that drive carriage assembly had a locker that was broken as such, the carriage assembly could not move in the direction as the motor drives the belt on.
I simply inserted the belt in position and drop a little drop of super glue to it, let it dry off.
Assemble my printer, and it was ok and is working.

the only thing i can think off is there is a problem with the head sensor, the heads move back and forth on a rigid belt but the head case also runs along a see through plastic strip, this has lines in it and tells the printer were it is, other thing i can think of is the head cleaner, they can get stuck in them sometimes and cause misalignment and damage the reader. also anything they like to use on printers is a inc use chip that can make faults come up so you have to buy a new printer. this has been in a few articles. business printers don't have this feature. hope this helps

Contated Kodak about the error code 3527 and was advised I needed to purchase another printer and they would give me a 30% discount. Why would I do that when my Kodak printer is only 14 months old! My Dell is 9 years old and works fine! Dell ink cartrides are expensive and can only be ordered online. That is why I switched to Kodak. Do not buy Kodak!

kodak 5250 kod 3527

Hii follow the below link to fix kodak esp3250 error code 3527

http://tinyurl.com/kodakerror
All the Best

Hello. I have this problem with my current printer, esp 9250. I don't know how you resolved it but I contacted Kodak via livechat (on their website) and the person told me I had to get a new printer. I couldn't get a new printhead because she said it didn't move to the center when i opened the cover, so that means the printer hardware is broken. Needless to say, I am frustrated. I asked her if Kodak would lessen my cost by sending me a coupon or ANYTHING, and she said sorry but no. So yeah. Basically you just gotta get a new printer... :(

Print cartridge jam error 3527
I cleared this error by manually moving the head cleaning pad into its stand by position It must of stuck while changing the ink cartridges.