Ricoh Aficio SP c231n How to change pick up roller?

SOURCE: driver for Ricoh Aficio SP-C210SF

Please browse the link below;

http://www.ricoh-support.com/enduser/downloads/downloads.asp?fileid=11342&ricohmodelid=6317&url=http%3A%2F%2Fsupport%2Ericoh%2Ecom%2Fbb%2Fhtml%2Fdr%5Fut%5Fe%2Fre%2Fmodel%2Fspc210%2Fspc210en%2Ehtm

Good luck and please rate me, thanks.

SOURCE: Ricoh Aficio SP C410DN "set toner cartridge correctly"

It sounds like the part the toner bottle slides under to lock in place is broken. you could try and fold some paper and tape it to the toner to hold it down.

OfficeServiceAjnc

• 215 Answers
• Posted on Jan 13, 2010

SOURCE: i have a ricoh aficio sp c420dn, when and turn on

You may try first to reset the SC 542 before calling a technician!

That you can do by following method:

1.Turn the machine off and then after 5 second turn it on while pressing the “On Line” key and “Escape” key together until “SYSTEMver x.xx/1. Service” shows on the display.
2.Use the “Up/Down arrow” keys to scroll through the menu listing.
3. Press the (OK) key while on the display writes " 2. Engine " .
4.go to "[5810 001] - Fusing SC Reset" by scrolling the “Up/Down arrow” keys and press the [OK] key (on the display should write execute or done) press [OK] again if is needed to press it.
5. After this turn off and than after 5 second turn it on the machine.
Please do not change nothing else in this menu only reset the fusing unit SC code, because if you change some other values and settings you might to regret that and pay high price for that.
So only reset the Fuser SC code SC542 by the upper mentioned method and do nothing else, if the SC code appear again then do not try this again because you might burn some parts.
If this do not help than call the technician.
Please answer do this is helpful for i to know do the problem was solved.
Regards

SOURCE: I need to print the

From the manual:

"To Print configuration page, turn the printer off then while pressing and holding [the stop/start key] down, turn the printer back on, holding the key down until the READY indicator flashes once. The configuration page will then print out"

Testimonial: "Thank you. Could not find it on Ricoh's site."

SOURCE: Ricoh Aficio SP C411dn error SC542

Ricoh Aficio error SC542