How do i get a video to play on LCD screen - Canon ZR500 Mini DV Digital Camcorder

Hello, try to reset the camera, if you need more help to repair your video camera i found a factory service manual for it you can download from the below link:
http://goo.gl/Ji4XI
Good Luck

How about different videos do they have the same resolution? If yes the problem here is not with the video from the camera it can be the resolution of your computer , because if the video card of your computer is not high and the resolution is also not that high video will not look sharp when play to the computer compare when play directly from the camera...

Hope that helps.........

take the lense cap off

This sounds like you may need to replace the Micro's LCD screen. You could probably buy one for cheap on eBay or buy a really cheap Micro and put it's screen into your Micro. You said it still plays audio, so it sounds to me like it's still working and not bricked. If it still syncs with your computer then it would be worth replacing the LCD screen.

I made a video tutorial a while back that shows you step-by-step how to replace your LCD screen.

Disassembly video: http://youtu.be/PoldVTD7BaM
Reassembly video: http://youtu.be/QVnwFQZdvu4

First, make sure you have it on CARD (and not DISK), and on the "playback" (and not record) mode. Next, does the camera play back other video clips normally, but just not a specific clip ?
Does the selected video clip frame (index) shown on the LCD screen have a picture ? If not, i.e. it is blank (dark), then it is likely that no video was recorded (i.e. just the audio) when you were shooting that video clip.
If there is a picture (of the video clip frame index on the LCD screen) and only audio is playing, try downloading the clip (from the SD card) to your computer, or simply try to play the video on the SD card (inserted directly into your SD card reader on your computer, or via a USB SD card reader) and see if the video clip will play normally on your computer.

Try this.

Disable hardware accelerating on your adobe flash player Settings.

Can be done by Right Clicking the Video and selecting settings

Then uncheck the hardware accleration. Then see if you can play in full screen.

update the display adapter and check with the requirements for the game
if required upgrade the video card

no fix, lcd screen is out. call there 1-800 number

you can try changing your overlay settings. works with some formats. or you could use the projector as main display (toggle through fn+LCD/CRT)

Take a look at this web site for Sonic Impact. This may provide an anwer to your problem.

http://www.si5.com/support_newnano.php