Maytag legacy series electric dryer won't start model #med5770tq0

john gagnon

• 943 Answers
• Posted on Oct 14, 2008

SOURCE: Gas Dryer

HI thanks for your question. the problem is with the coils on the gas valve. one has failed. they come in a pack of 2 replace the coils. thanks the appliance doc. please rate my answer. thanks.

Ron Coons

• 2651 Answers
• Posted on Dec 01, 2008

SOURCE: How do I open the dryer to replace a loose belt?

there are 2 clips holding down the main top, approx, 3-4 inches in form each side of the main top where it meets the front panel. With a flat blade screw driver or a putty knife, youll be able to "pop" the clips and tilt the top backwards, form there there ar3 2 5/16screws holding hte front panel on within hte machine.

SOURCE: Maytag electic dryer noise

First, pop up the top of the dryer -- use a large slotted screwdriver under each corner of the top. There will be screws holding the front of the dryer -- take these out and take the front off. The squealing is coming from roller bushings which need lubricating. Apply machine oil to all the axles/bushings -- this most likely will stop the squealing -- and don't forget to unplug it first.

SOURCE: Maytag Quiet Series 200 Electric Dryer

I also had a similar problem with my maytag dryer which is 3 1/2 years old. It was the idler lever assembly with pulley. The part number is 11222607JG and the cost is about $20.00. Hope this helps.

SOURCE: Maytag Legacy Series Dryer SDE515DAYW

dryer squeking how do i fix