Colorwave 650 error code 450013 - iPhone Apps

Question edited for clarity.

Oce Guy

• OCE Expert
• 303 Answers

The error is Unexpected Nozzle Outs. Ensure that the print surface is clean and you change out your waste toner tray every time you replace a toner pearl cartridge. Sometimes these errors go away with heavy ink usage. Ensure that the paper roll ends are not damaged. That won't fix your issue, but if the rolls are damaged they don't sit flat on the print surface and then the semi dry ink will scrape across the Imaging Devices and add to the problem. Go into the Configuration menu and turn on Enhanced Cleaning. If this doesn't fix the problem in a week, then I would recommend calling an authorized Oce technician. A warning...the Imaging Devices are extremely pricey and you have 8 of them in this machine. Two of each colour. CMYK.

https://www.google.com/search?q=colorwave+650+Error+code+4706

..

The error code 22550 on the OCE ColorWave 650 indicates a "Paper Jam in Output Tray".

This error typically occurs when paper or other debris becomes lodged in the output tray or the paper path leading to the output tray, preventing printed pages from exiting the printer.

To clear the error and resolve the issue, follow these steps:

1. Turn off the printer and unplug it from the power source.
2. Open the output tray and remove any jammed paper or debris.
3. Check the paper path leading to the output tray for any obstructions or debris, and remove them as necessary.
4. Close the output tray and turn the printer back on.
5. Try printing a test page to ensure that the error has been cleared.

If the error persists, there may be a mechanical issue with the printer that requires service from a qualified technician.

https://www.fixya.com/support/t26755335-oce_colorwave_500_error_code_4706

https://www.google.com/search?q=error+code+4706+on+oce+650+colorwave

..

http://www.precisionroller.com/all-supplies-and-parts-for-oce-colorwave-650/products.html

Contact a vendor and ask if they use the same or not.

https://www.plot-it.co.uk/c/consumables/ink_and_print_heads_for_wide_format_devices/oce_wide_format_ink_print_heads_and_maintenance_cassettes_


Oce Wide Format Ink Print Heads Maintenance Cartridges plot IT

What is the error code?

Channel Block heater loose. This could be the microfuse on the carriage board, but most likely is the Imaging Device (Printhead).
Be aware that this is a very expensive part.

450022 Imaging Device defect
22551 Unexpected unit connection lost
22545 Unexpected inter unit communication lost.

This is a no toner detected error inside the print head or "Imaging Device". Sometimes a toner pearl misses its mark and bounces out of the tube, although this is rare. If you reboot the system after the printer has cooled down, see if the problem returns. If it does, there could be a problem with the toner dispenser or a problem with the print head itself.

CAN bus subnode reset detected.

These errors indicate registry errors or system files corruption. It could be due to virus or spywares leading to system file/registry corruption.