Remove parental control jvc - JVC AV-27230 27" TV

To remove parental controls completly you can go to control panel>user accounts and you should see the instructions to remove the parental controls.

u can buy a chip universal remote control from walmart and programed to this tv and then acces to the parent control

Hi,

Unfortunately, you need to have the original remote control to turn off parental control lock.You need to use original remote control to access menu and then turn off the control lock.There is no alternate way.If the remote is not working, you need to buy a used / new remote.You could buy it from :-

http://cgi.ebay.com/JVC-AV3685-AV27850-AV32850-AV36850-TV-Remote-Control-/380292217173?pt=LH_DefaultDomain_0&hash=item588b2eb955



Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

You're going to have to call nintendo to remove the parental controls. They will give you a special code to remove the parental controls.



How to Remove Parental Controls:
Use the information below to remove any Parental Controls that have been put in place.

1. On the Nintendo DSi Menu, use the stylus to select the Settings ("wrench") icon.
2. Select the right arrow twice to reach the third page, then select "Parental Controls."
3. Select "Yes," to change the parental controls.
4. You will be prompted for your 4-digit PIN.
   • If you know the PIN, select the empty text box and enter the PIN using the on-screen keyboard, then select "OK" to continue.
   • If you don't know the PIN, select "I forgot," then select the empty text box for the answer to the secret question and enter it using the on-screen keyboard. Select "OK" to continue.
   • If you don't know either the PIN or the secret question, the Parental Controls will need to be reset. Please call 1-800-255-3700 for assistance.
5. Select "Clear Settings," then select "Yes" to confirm.

Found the manual for the player buried in a box from moving. Procedure is
1) With no DVD in player
2) Press enter while holding down shift to display parental lock menu
3) If you dont remember the password enter 8888 to access the options
4) Use cursor to move arrow to country code option
5) Use right cursor to select country code, then down cursor to move country code to US
6) Use left cursor and down cursor and right cursor to move to set level
7) Use down cursor to toggle through level options. (None removes all blocks)
8) If setting a level toggle down to password and set new 4 digit password.

This TV calls it "V-Chip". Code is "0000" by default.

1. go to TV User Menu
2. select "TV" menu
3. selct "V-Chip"
4. change this to a lower setting

My parent's JVC did this as well. It took us a little while to solve it (and through searching for how to fix it, found this post).

Using the JVC's remote control, we pushed the C.C. (closed caption) button and cycled to the "OFF" setting. That fixed it. Using the TV's front panel setting did not fix the issue, we had to use the remote control.

Note: the "text" CC setting re-displays the black box.

enter your menu and turn off parental control to un lock front panel controls.

Try unplugging the tv for a few minutes. This reset the front panel lock on my JVC tv. I got it from the manual, which I found at the JVC site by Googling the specific model of the tv along with JVC and manual. I found the manual right away.

Disconnect power to the TV. The power interruption will allow you to reset the parental control password to the default password of 0000.

To change the password after disconnecting the power, do the following:

1. Press the Menu button on the remote.
2. Arrow up / down to SET LOCK CODE
The lock icom will appear
3. Arrow left / right to operate
4. Press 0 to access the lock code
5. The first digit will be highlighted.
Arrow left / right to select the number
Arrow up / down to move to the next digit
4. Continue to follow these directions for all 4 code numbers.
5. Arrow up / down to FINISH
6. Arrow left / right to save settings and exit.

The password has now been reset.