There are as many possibilities as there are when trying to find a needle in the haystack. The first think to look for is the WiFi is in range. How o you do the Internet on TV, cable, Wireless or... I don't know unless you spend little more time next time you write a problem on FixYa. You first need to explain whether it is cable connection to the TV, which is a bit impossible, unless your smart TV has wireless connections. Other things that you need to check is the wireless range seen on the TV (those tiny bar-graphs usually seen at the bottom right of the screen), are they all active? They're usually 5 little vertical bars. If the Wireless is fine, you can be sure you will have the Internet, no matter what. If it is not loading you have to reset the code to match the wireless signal of your ISP. Better still, your TV is really a modern one, since it is a Smart TV and it comes with a Manual you cannot fail to understand. Read it carefully under the 'Wireless Connection' section and you cannot go wrong. Panicking over nothing doesn't get you anywhere closer to a solution to your problem. Like computers, Smart TV requires an Internet Service Provider (ISP) and a Wireless Modem to start with. Do you still feel confused? Then try this link below. It may help you... http://www.knowhow.com/article.dhtml?articleReference=1246&country=uk ...or, lastly, contact Hitachi.
Www.hitachi-america.us/products/consumer/tv/support_contact
SOURCE: THE MENU KEEPS POPPING UP ON THE SCREEN CONTINOUSLY ON MY 42 INCH
I had an LG 37" LCD that did this to me. Turned out to be bad solder joints on the side button board. Just reflowed and it starting working fine.
But now that I think about, I had another set do the same thing, only it wasn't the button board. I had to upgrade the TV's firmware via the USB service port. Just needed a USB flash drive and downloaded the firmware from the mfg's website. There were easy to follow instructions there too!
SOURCE: haier 42 inch tv says no signal, not available
Your son, or daught hit some button, happend to me too. But i dont remember wat i did. Just try to unplug the tv and plug it bck in
SOURCE: how do i get my 42 inch tv out of retail mode?
Hi ekirchman
So that i can help you;
Could i have your tv`s model# so that i can give you the information that is pertinent to your model.
Be waiting for your reply
SOURCE: how to connect hitachi tv 42" to internet inorder
A computer and a VGA computer cable. The TV has to have the computer VGA hookup in the back of the set. Once hooked up you will need to get the proper input on the TV to VGA or PC.
451 views
Usually answered in minutes!
×