Question about LG WM2277H Front Load Washer

Open Question

How do I fix an E2 error code samsung washer - LG WM2277H Front Load Washer

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does E2 error mean


Generic pump error

Error Code-control panel display "Err2" (Error 2, Error2) ' question ...

www.haier.com/za/help.../washing_machine/.../question/.../t20140313_209219.shtml
  1. Cached
  2. Similar
Mar 13, 2014 - Error message:Drain error, water can be not drained fully within the required drain time (controlled by PCB software). Reason 1. Pump filter is blocked. Solution 1. Please open and clean the pump filter. (Filter access door is on the bottom right, at floor level of the washing machine). Step 1.Push a flat blade ...

How To Fix Maytag Washer Beeping And Error Codes E2 and F3 Front ...

9k=? 5:23 https://www.youtube.com/watch?v=by94vOVmmhQ
  1. Similar
Mar 18, 2017 - Uploaded by Nancy Gurish How To Fix Maytag Washer Beeping And Error Codes E2 and F3 Front Load Washer Stopped, Repair Of ...

Washing Machine Error Codes - Front Load and Top Load Washers ...

https://removeandreplace.com/.../washing-machine-error-codes-front-and-top-load/
  1. Cached
  2. Similar
May 5, 2015 - F9 followed by E1 - (drain pump system error) F5 followed by E2 - (door will not lock) F7 followed by E1 - (motor drive error) "rL" - (remove load) Washer making error beeps - Door has not been opened and closed for at least 3 cycles. Washer beeps when HOLD TO START is touched - Door not closed

Mar 22, 2018 | Washing Machines

1 Answer

Hi. I have Samsung dishwasher DMS500TR has E2 error code, how to fix it, also how to hard reset the machine? Thank you in advance


The E2 code is a water supply error.
The water inlet valve has stopped working.
Try going here...
appliancepartspros.com
with the model # and you can look up the part and how to put it in.
Tis not hard. A phillips & flat blade screwdriver and some pliers.

Mar 04, 2018 | Samsung Dishwashers

1 Answer

E2 error on a Samsung washing machine


The E2 error indicates a stuck or shorted key on the touch pad or a wiring problem between the touch pad and the main control board. Sometimes this can be cleared by unplugging the washer for 2-5 minutes. (Note: this is usually a temporary fix.) Next run your fingers across the keys. If you find one is lower than the others, that's the stuck key. Try to get it to move; sometimes just pressing it again will work.

You should check the wiring between the control board and the touch pad for any loose connections and for any corrosion or damaged insulation. Replace damaged wiring; reconnect loose wires. (To access this, unplug the washer and remove either the top or access panel at the back of the washer.)

If these don't help, you'll need to replace the touch pad or the control assembly (touch pad and control board). If you add a comment with the washer model, I may be able to supply the parts information for the unit. If your washer is under warranty, contact Samsung.

I hope this helps.

Cindy Wells

Jun 29, 2016 | Samsung Washing Machines

1 Answer

I am looking after a house and dog in Brisbane Australia. I used the Samsung Dish Washer twice with lovely results. The third time I got an error message E2


Please consult the schematic attached to the kick plate of the dishwasher. I'm has lol the error codes list d and how to troubleshoot.

Jan 03, 2016 | Samsung Washing Machines

1 Answer

I have samsung and it displays l5


If it is E2 15 then it may be a switch error (Main Relay error) Check for stuck button switches or power button switch for sticking. May need to replace the main PBA. Verify the error and provide the model number to verify the error code specific to your model.

Aug 28, 2012 | Samsung WF210ANW 3.5 Cu. Ft. White Front...

1 Answer

Samsung washer front load willnot rinse - no water coming out of hose to drain. E2 shows up


Hello,It is drain pump error. Possible solution:
• Clean the debris filter.
• Make sure the drainage hose is installed correctly.
If wont help you need to look in drain pump/wiring
More information about error codes here:
http://downloadcenter.samsung.com/content/UM/200411/20041124151342484_B1515-01527B-0603.pdf#search=%22samsung%20big%20wash%20b1415j%22

Thanks

May 31, 2010 | Samsung WF337AA Front Load Washer

1 Answer

I am getting an E2 error on the display. The


either any of the key(button)is got stuck up prtessed or the motor of the washer is got weak.due to this e2 error code shows up.the washer works if the motor is weak but if there are more clothes in the washer and due to that motor cannot spin properly so it shows e2.First clean the washer internally after emptying it completely then check.if still e2 error then motor needs replacement . you can get new motor at www.repairclinic.com

Aug 30, 2009 | Amana Washing Machines

1 Answer

Power cuts off


The machine beeps E2 all the time. Actually E2 error code means washer door is not closed properly. However washer door does close properly, but the machine still beeps with showing E2 error code. Please help solve this problem.

Many thanks,

Robert

Jul 04, 2008 | Haier XQB60-91AF Top Load Washer

Not finding what you are looking for?
LG WM2277H Front Load Washer Logo

Related Topics:

295 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

Cindy Wells

Level 3 Expert

6073 Answers

Are you a LG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...