Galaxy 29hp no key up - Galaxy Radios Microsystems DX33HP CB Radio

I replaced my 29hp fk801v Kawasaki on my lzz29ka606 exmark laser z mower today I am having trouble with the ignition wiring
As so as I turn the key from off to on [not in start position] the starter starts to crank the engine over a think I might have it wired wrong or maybe a bad relay the reason I had to change the engine was because it looks like something locked up in the engine and caused the starter housing to grenade just wondering if the starter running may have caused it to happen hope someone can help out thanks yal be safe

Perform a hardware factory reset - Samsung Galaxy Tab 2 10.1

1. A master reset will return the tablet to the default factory settings and erase all personal information on the tablet. All important information should be backed up before proceeding.
   With the tablet turned off, press and hold the Volume Up key.
   Note: To turn the tablet off completely, press the power key, tap Power off,and tap OK.
2. While holding down the Volume Up key, press and hold the Power key.
3. Hold both the Volume Up key and the Power key until the Samsung logo appears.
   Release the Power key when the Samsung logo appears.
   When the Samsung Galaxy Tab 2 10.1 logo appears, release the Volume Up key.
4. Press the Volume Down key to scroll to wipe data/factory reset.
5. With wipe data/factory reset highlighted, press the Power button.
6. Press the Volume Down key to scroll to Yes --delete all user data and press the Power key.
7. Once the wipe is complete, press the Power key to select reboot system now.
8. The master reset is now complete. The tablet will restart.

Check the pickup inside the fuel tank and the supply valve.

Samsung T499 Dart Android hard reset

1. Turn off Samsung Dart. Press and hold Volume up key + POWER on the
phone. Reset

2. When the Android System Recovery screen appears, release the keys.

3. Using the volume keys, scroll down to Wipe Data / Factory Reset.

4. Press the Power key to confirm.

5. With Volume select Yes -- delete all user. Press the Power key to
confirm.
After master reset select Reboot System Now. Press the Power key to confirm.

6. Your T-mobile Samsung Dart phone reseted to the factory default state.

(This should work but if not, try both volume + power)

Samsung T-mobile Dart reset

A Samsung T499 master reset restores the original factory settings and
may erase all downloaded content, including ringtones, images, programs,
and contacts stored in the internal memory. It does not erase data
stored on the SIM card or memory card (if available).

To perform a hard reset, follow these steps.


Samsung Dart T499 Factory Data Reset

From this menu you can reset your phone and sound settings to the
factory default settings.
1. Press Samsung Dart T499 reset - Samsung Dart T499 reset and then tap
Samsung Dart T499 reset settings key (Settings) - Privacy.
2. Tap Factory data reset. This action erases all data from your phone
except current system
software and bundled applications, or SD card files such as music or photos.
3. Tap Reset phone - Erase everything.

Samsung Dart Password code try 1234

or

Use this method to hard reset your Samsung Dart Android phone: Enter
*2767*3855#. Warning! All your data including contacts, messages etc.
will be lost! Copy all your necessary data/Contacts/Messages etc. to SIM
or make backup to your PC before full reset! Take out SIM card before
full reset.

Settings/ apps/ select app/ clear cache & clear data

Do you mean the FM Deviation or Detector Adjustment? I haven't found a schematic on the DX29HP yet but it may be the same as the DX33. NO GAURANTEE! The DX 33 has VR5 as the FM Deviation. You'll want to borrow or buy an FM Deviation Meter to adjust that. The FM Detector is L5. You'll need to Connect an AF VTVM or scope to IC2 Pin 7. In FM, Set FM RF Generator to 26.965 MHz (CB Channel 1) and at a level of .5uV deviated 3 KHz with 1KHz audio tone.
Reduce the volume as you need to. AGAIN!!! THE DX29HP MAY NOT BE ANYTHING LIKE THE DX33. If you are not sure, please pay someone to make the adjustments for you. It's a pretty nice little rig.

Only way is Hard reset
All data in phone memory will erase( contacts sms etc)
can recover if it is backed up external memory or google account
Hard Reset Steps:

- Make sure that your Samsung S6102 Galaxy Y Duos is Off, And has no SIM or Memory cards are inside.
- Take out its battery for 10 seconds, Then put it in again.
- Press and hold Volume Up + Home Keys, Then press Power.
- Keep pressing the above keys until Samsung logo appears,Then release all keys.
- Wait until you are into Factory reset / System Recovery menu.
- Use Volume Down key to scroll down and select Wipe Data / Factory Reset option.
- Use Power button or Home key to confirm the operation.
- You need to use the Volume Down key again to select "Yes -- delete all user data"
- Use Power button or Home key to confirm the operation one more time.
- After performing the hard reset, Select Reboot System Now option, And confirm it usingPower button or Home key.
- Now the phone will reboots, Wait for it to be fully on and then you can start using it.

Notice: The Hard Reset / Factory Reset operation will delete anything that are saved in your phone's internal memory, So make a backup of your data in case you can access them.

Safe mode in Galaxy Ace s5830
To START "Safe Mode" use both hands to Press the Home Key (bottom centre) and then simultaneously Press BOTH the Power (right hand side) key, and the Volume-Up (left-hand side) key. When the Samsung Galaxy logo appears, release the sides' Power and Volume-Up keys but keep the Home key pressed. Safe Mode should come on shortly. SIMPLY DOING THIS SAME KEYING SEQUENCE, WHILE THE PHONE SHOWS "SAFE MODE" IN THE BOTTOM LEFT CORNER OF THE SCREEN, SEEMS TO TURN THAT "SAFE MODE" OFF. Safe Mode prevents Third Party Apps running, apparently.

Apply 8 volts to the rear pin of the connector to the right of IC4. I would use the talkback switch. I haven't seen a 29hp yet but I believe it uses the 6900 board used in most of the new Galaxys.

my galaxy 88 cb makes a popping noise through the speaker when I key up how do I solve this problem?