When I plug phone in I get RSD protocal support an it won"t do nothing

Phone has had a fatal error. It will need to be reflashed. Contact Us or Sprint for assistance.

http://www.motorola.com/support

Mark
Motorola Support

Sounds like the phone may need to be reflashed.

Motorola L6i Solution.
download the fullflash from this link
https://rs27l32.rapidshare.com/#!download'27tl4'19708271'R3443H1_G_0A.64.19R_PDS001_LP0015_DRM0201_JPJAVA_G_0A_L6_03_00_20R_GSVL6iT678DR03C_1FF.rar'12071'R~389A241D1C262AC27865CC592E190002'0'0

download rsd lite from here
https://rs35l3.rapidshare.com/#!download'35dt'21012706'RSD_LITE_3_5.rar'5835'R~0'0'0

install the rsd lite on your pc and extract the firmware you downloaded with winrar or winzip, remove and insert battery again, press *+#+power all at the same time, you phone should enter flash mode, conect to pc and open rsd, click browse and select the file you extracted, click start and wait till process completes and phone reboots. all will be ok. Note: all data will be lost.

you can contact the service provider......

How to fix Motorola Flash Mode Of Death To do this you must have a fully charged batery, i know when your phone is stuck in flash mode you cant charge your battery so your gonna have to buy a new one or try to charge the battery i another phone.

First download Motorola RSD Lite 3.2 from here http://www.cpfxwireless.com/downloads



Then download the Monster flash file from here http://www.cpfxwireless.com/downloads (Same place i no)

Then extract your monster flash file, save it to somewhere on your computer.Plug in your phone when on motorola flash mode .Open RSD lite , find your monster flash file wherever you saved it then click on start. You can always use the Motorola Software update , but i already had the latest software on my phone so there was nothing to update

Hi there,

Well the problem seems due to some firmware issue, might be the firmware is corrupt. first of all you can try to reset your phone to the factory default settings....... If further you have the same problem then you can try updating the firmware on your phone, follow the below steps to know how to update firmware -

1- You 1st have to have the motorola phone drivers installed on your computer. Get them here: http://data.mofan.mobi/index.php?dir..._32_v3.5.0.rar

2- Then plug in your phone with a cable and let the computer recognize your phone.

3- Unplug and go main menu-connections - usb settings-change this to modem (I keep mine set like this)

4- Download and Install rsd lite- I use version 3.9. Get it here: http://data.mofan.mobi/index.php?dir...D_LITE_3_9.rar

5- Now plug your phone back into your computer. Wait about 30 seconds so the computer recognizes your phone again.

6-Now start rsd lite. It will eventually recognize your phone. Wait 30 seconds. It will show up in the bottom window.

7- Now find where you downloaded the flash you wish to install.
Click the ... next to filename window to search your computer.

8-After you highlght the flash (the file ends in .sbt)
Click Start.

9- Now wait. It may take 5 to 10 minutes. make sure the result says PASS before you disconnect your phone.

10 - Close rsd, reboot your phone and you will be all set. Your phone is now using the new flash.

Good Luck!!

your firmware is corrupt, the only way to revive your phone is re flashing it.Its hard to do, and by doing it wrong may damage your phone. To safely retrieve your phone is let the experts do it or go to a near cell repair shop and let them help you out,

if you want to do it your self, try this

first you need is a RSD lite program or flash and back-up to flash or reformat your Motorola,

to enter the bootloader

hold * then the # then power button, your phone will boot to bootloader, and you will see there the flash program of your phone,

start the program rsd lite or flash and backup
then connect it to your computer VIA usb, automatically the program will detect your phone,

i prefer that you first buck up your firmware by using F&B (Flash and backup) then use RSD lite to flash your Motorola,

RSD lite its much easier to use than F&B, but for safety backup first your firmware,

gudluck

first you need is a RSD lite program or flash and back-up to flash or reformat your Motorola,

to enter the bootloader

hold * then the # then power button, your phone will boot to bootloader, and you will see there the flash program of your phone,

start the program rsd lite or flash and backup
then connect it to your computer VIA usb, automatically the program will detect your phone,

i prefer that you first buck up your firmware by using F&B (Flash and backup) then use RSD lite to flash your Motorola,

RSD lite its much easier to use than F&B, but for safety backup first your firmware,

gudluck

Take the phone to a mobile service shop and have the usb port check

http://www.mobile-files.com/forum/archive/index.php/t-54197.html list of flash files