Question about Connex Cx-366ce Night Runner 40ch Cb Radio, Very Loud

1 Answer

Plugged in heard talk then nothing lights still worked but no power signal. help

Plugged in to cigerette lighter. Heard talking then within a minute there was no sound power indicator was not showing power but lights were working

Posted by Anonymous on


1 Answer

Mike Charette

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Connex Master
  • 1,847 Answers

Probably sent enough power thru the reverse polarity diode to burd it but still have enough to keep lights on.

Posted on Jul 23, 2014


1 Related Answer

Melanie Rogers

  • 219 Answers

SOURCE: I have a cx-4300 it dosnt seam to receive

It has to be on high band d/a to talk on you're 40 basic channels and no you can not run this off a cig. plug it needs to go to the battery. This is an AM radio so it has to be on AM.

Posted on Sep 12, 2010


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Power went out a few days ago. When it came back on my phone won't work. Says it is out of range. I have unplugged, plugged back in; used a different plug in. Nothing is working.

If you are talking about your smart phone, then it is probably set to use WI-FI for calling and your WI-FI router powered off during the power failure. Find your router and turn it on or unplug it from the wall and plug it back in. Within a few minutes you should be working again. Otherwise, you will have to call your ISP (Internet Service Provider) for help.

Apr 11, 2017 | Power Computers & Internet

1 Answer

I have a cx-366ce cb cannot hear talking what is wrong

Is squelch turned too high that it is blocking too many signals?
Otherwise, it could be a faulty cable on the mic as the PTT button disconnects the speaker on the CB and a broken wire can cause the speaker to be disconnected.

Jun 28, 2014 | Connex Cx-366ce Night Runner 40ch Cb...

2 Answers

Galaxy dx959 will not receive. Speaker is working. S meter is showing incoming signal.

the over power doides may be blown. you should start there .they should be marked D-1 and D-2. you may want to replace them with diodes of a higher rating.

Jun 26, 2012 | Galaxy Radios DX 959 SSB CB Radio

1 Answer

How many fuses and where at for a cigarette lighter in a 2000 rav-4

This is for anyone with this problem, I had the SAME issue and NO one had the right answer on here, if they best you can do is "this must be a wiring isssue" your an IDIOT and should go back to facebooking. IF you have checked your fuses and that is not the issue, it is the cigerette lighter, there are fuses behind here that have gone out and is not completing the circuit for the radio, the lighter, the clock or the automatic windows. I found a 5 minute fix and it works on you tube! THANK you for people that know what they are talking about out is the link.

Aug 22, 2011 | 1999 Toyota RAV4

1 Answer

I can't get the radios to communicate with eachother, they have power and chirp when I press the talk button but nothing is being received.??? They look like the EM1000 model of Motorola radios. The FCC...

These are multi-channel FRS / GMRS radios. In order to receive transmitted signals from the other radio, they both must be set to the same Channel and the same Interference Eliminator Code. One without the other will keep audio from being heard on the receiving radio.

I suspect you need to refresh yourself with the radio's controls and settings. If you have lost the manual, you can get a copy free of charge from Motorola You'll need a free program called Adobe Reader to view it.

Once you have everything - look at the right hand side of page 1 for "Talking and Listening" followed by "Menu Options" to set the radios up correctly. Keep in mind that if VOX is selected, and there is sound near both radios, they both will transmit at the same time - since the radios receive OR transmit at any given time, no audio will be heard from either.

Please rate this reply if helpful & good luck!

Aug 18, 2010 | Motorola EM1000R Two Way Radio

2 Answers

2002 Olds Aurora.All interior lights are out. Found blown fuse.

Your Interior lights share a fuse with alot of other circuits and if I remember correctly the switches are built into the door latches.On some of the models the cigerette lighter is on the same circuit and if your element is bad it can short out,also you could check wiring between doors and body to see if any rubbed thru.

Aug 23, 2009 | 2002 Oldsmobile Aurora

1 Answer

Vizio P50HDM No Picture/No Sound

this is most likely the sustainer board(s) problem. Replacing the sustainer boards should correct this problem for you. you can get the parts at

May 29, 2009 | Vizio P50HDTV10A 50 in. Plasma HDTV

1 Answer

Alesis m-eq 230 stereo equalizer will cut out after 1 hr

Your internal circutry is failing... it sounds like its happening after it gets warm, which may cause an old/cheap part (or parts, like capacitors) to fail inside. think about how long have you had these items and how much use they have had.  As always, thanks for using fixya

Dec 27, 2008 | Audio Players & Recorders

Not finding what you are looking for?
Connex Cx-366ce Night Runner 40ch Cb Radio, Very Loud Logo

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top Connex Radio Communications Experts

Brad Brown

Level 3 Expert

18591 Answers

Tony Raia

Level 2 Expert

264 Answers


Level 3 Expert

85239 Answers

Are you a Connex Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides