Lost my installation cd

Sir Lost My Installation cd, Belkin, Wireless Router Model : F5D7231-4, FCC ID : H8NRT2406W. Pl Provide Software

You do not have to use the cd. Go to the control panel and un-install the program that the cd installed. then:
Shutdown your PC. Unplug the power from the router and the cable modem.
Wait 30 sec. then plug in the power to the cable modem, wait 30 sec. then plug the power to the router. Wait till you have "Internet" light then restart your PC. The PC should pick up an IP address and you should be able to get on-line. This is if you have a cable service provider. If you have DSL, the router needs to be configured with PPOe.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response. Happy Holidays!

Thanks, Joe


I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

you can find the support page for Belkin routers here:

http://en-us-support.belkin.com/app/product/list/q/routers/

follow the directions on screen, select your make and model number, and version (if needed) and you should be able to download the proper drivers for your device.

mpshyla

The reason for the CD is to configure the router to your cable modem. So if you reinstalled your computer you do not need the CD again. All you need to do is set the computer's Gateway back to your router. The links below will help you do this.

http://www.fixya.com/support/r4602477-check_change_computer_ip_address_in

Let me know if you have any more problems or questions.

Issken
http://www.fixya.com/users/issken

Hello there!

Here you go.

http://www.dlink.com/corporate/worldwideoffices/?redirect=%2fdefault.aspx

Thats big manufacturer you should find what you need in download section.

Sincerely
Aleksandar Adzic

hi,
it should be an ip conflict.I believe you are using both routers at same time which can give same ip address (as both routers ip range is same).hence by disconnecting one router(from network/power) will make your ip conflict resolved.
secondly there is no need of linksys installation cd as it will do more harm than good.routers dont need any software to run where as network adapters need drivers.if you have any further doubts ,you can directly post it.
thank you

The installation CD is actually just a guide. It does not install any software on the computer. You can configure/reconfigure the router even without the installation CD.

If you need help reconfiguring the router, please let me know.

Please provide also the following info:
1. Who is your Internet Service Prodiver?
2. What is the model/brand of your modem?

Go on and reset your router. You do not need the original installation equipment.
After you have reset your router connect it to your computer/laptop using the LAN wire.
Enter your router IP address in the browser address bar and your routers page will pop up. Now all you have to do it set it up according to your liking.

Click HERE to get Logitech drivers for your webcam.

i lost my cd now i ahve to reinstall my web cam how can i do that