Diagram spark plug wire diagram - Chevrolet 1994 Chevrolet Blazer/jimmy full Size Radio

Had difficulty preparing the diagram. Here is a video: How to Replace Spark Plug Wire Set 95-97 Honda Accord - YouTube
I'll try again as you won't be amused by that. Cylinder Firing Orders & Engine Diagrams - AutoZone Hmm, still trying.
4 - 3 - 2 - 1 for the spark plug wire routing of a 1997 Honda
If you need more information on how to replace the spark plug wires on your Honda Accord, you can check out this video tutorial from 1A Auto. It provides step-by-step instructions for properly replacing the spark plug wires on a 1995 Honda Accord V6 2.7L, but the procedure is similar for all 95-97 Honda Accord V6 2.7L models.

That's the diagram

Lancer? Galant? Year?

All questions need 'year make model' as first 3 words.

https://www.google.com/search?q=2.0+Mitsubishi+Spark+plug+Wiring+diagram

..

SPARK PLUG WIRE REPLACEMENT (ENGINE CONTROLS - 3.1L)

Removal Procedure

1. Turn OFF the ignition.
Notice: Twist the spark plug boot one-half turn in order to release the boot. Pull on the spark plug boot only. Do not pull on the spark plug wire or the wire could be damaged.

2. Remove the spark plug wires 2, 4, and 6 from the engine left side spark plugs.
3. Remove the spark plug wires from the retaining clips.



4. Remove the spark plug wires 1, 3, and 5 from the engine right side spark plugs.
5. Remove the spark plug wires from the retaining clip.



6. Remove the spark plug wires from the ignition coils.
7. Remove the spark plug wires from the engine.
8. If you are replacing the spark plug wires, transfer any of the following components:
• Spark plug wire conduit
• Spark plug wire retaining clips

Installation Procedure

1. Install the spark plug wires to the engine.
2. Install the spark plug wires to the ignition coils.



3. Install the spark plug wires 1, 3, and 5 to the engine right side spark plugs.
4. Install the spark plug wires to the retaining clip.



5. Install the spark plug wires 2, 4, and 6 to the engine left side spark plugs.
6. Install the spark plug wires to the retaining clips.

v\:* { behavior : url(#default#VML); position:absolute; } v\:* { behavior : url(#default#VML); position:absolute; }

Here is a link for a 97 bird, maybe it'll help

Does anyone have the spark plug wiring diagram for 97 4 6 TBird

The COIL PACK TOWERS are numbered : coil----3---4 pack---2---6 plug----1---5 ----------------------------------------------------------------- The engine cylinders / spark plugs are numbered : passenger side , front to rear , 1 , 2 , 3 -----drivers side , front to rear , 4 , 5 , 6 ------------------------------------------------------------------- The spark plug firing order is ( 1 -4 - 2 - 5 - 3 - 6 )

If u can't see the diagram go to the link, just match up the numbers on the coil to the engine cylinder numbers.

http://autorepair.about.com/library/firing_orders/bl-fo-5630.htm

I can't upload the diagram but the firing order appears to be 1,4,6,3,2,5

Install the spark plug wire(s) (1, 3 and 5) to the engine right side spark plug(s).

Install the spark plug wire(s) to the retaining clips.

Install the spark plug wire(s) (2, 4 and 6) to the engine left side spark plug(s).

Install the spark plug wire(s) to the retaining clips.

You can get a copy of the service manual from Promanuals.net for cheap.

Hi
Here is a diagram.

I dont understand why you would need that unless you took off all the wires and took out all the plugs and forgot how the wires were.I have the same truck and I always do the plugs and wires one at time to make sure I make a mistake.If this is your ploblem let me know because i might be able to walk you though it.