Pioneer AVIC-N2 not working

Guys, I need help on my Pioneer Avic N3, I got the the right wires install, flashing red light ONLY., I connect the brain to the head unit but nothing.. [email protected]

make sure you are getting power to both the red and yellow wires. red is ignition or switched power and yellow is constant power.

sounds like you have blown your acc fuse or your risistor on your red wire on your radio has shorted out you can bypass this wire by choping it off it dose not affect the radio ,dvd at all.

Red = power Organ = battery Blue with a strip =remote
Blue antener ( the rest are speakers )

Sorry, but they won't work.

Try the reset button on face plate, right side.

no, this radio has no security code... Check to see that you have power on the yelow wire at all times, Power on the red wire when the key is on, and make sure the black wire is grounded well. something could have been disconnected at the paint shop.

The blinking light is the anti theft light. When face plate is off this light always blinks. As far as the system not working, make sure you have power, check with a voltmeter, then check fuses. Check the fuses on the wire harness and also where you connected the power leads to the vehicle. If you have power, make sure that all wires are connected correctly. Also, check the ports on the stereo and gps unit to make sure no pins are bent over. Sometimes this may happen. If all looks good, there could possibly be a problem with the system. Expensive to get fixed, but there are a few guys on ebay that will fix it for around $150. Might be worth it, but you need to talk to them about that.

davetuttle- is there a wire on this unit for the E brake,if so this wire needs to see ground in order to operate.Try this and it should get you running. cooltek Mar,3/08

Buy a cheap 12 volt tester pen from Radio Shack, and make sure your constant(yellow) always has power no matter  what position your ignition is and your accessory(red) only has power when the ignition is turned on. Some time those after market adapters are wrong(they are after market for a reason).