Have it done and the tech will reset the counter for the maintenance.
If you're in Houston we'd be happy to get you fixed up. Skelton Business Equipment Houston Copiers
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Ok so the TA code means that the all maintenance counter has reached its limit
To clear this you need to clear this easy you want
# , * , c , *
To enter service mode
Type in code 24 press start
Then you want sub code04
Then you can select what you want to clear so the maintenance count all
Execute this yes then press the CA key the machine will restart and away you go
I also do advise that you service representative comes along at some point to check the machine it could need parts because if you stretch the life of parts your machine could become unreliable... But that is up to you.
Ok so the DK code means that the Black drum counter has reached its limit
To clear this you need to clear this easy you want
# , * , c , *
To enter service mode
Type in code 24 press start
Then you want sub code07
Then you can select what you want to clear so the bk drum unit
Execute this yes then press the CA key the machine will restart and away you go
I also do advise that you service representative comes along at some point to check the machine it could need parts because if you stretch the life of parts your machine could become unreliable... But that is up to you.
Ok so the TA code means that the all maintenance counter has reached its limit To clear this you need to clear this easy you want # , * , c , * To enter service mode Type in code 24 press start Then you want sub code04 Then you can select what you want to clear so the maintenance count all Execute this yes then press the CA key the machine will restart and away you go I also do advise that you service representative comes along at some point to check the machine it could need parts because if you stretch the life of parts your machine could become unreliable... But that is up to you
The service acces code C-0-0-C,or C - interupt key -0-interupt key.Acces the list of commands maintenance preset counter setting and set to a new value,or maintenance counter clear.
Hello: All I have access to is the
Toshiba Version of your machine but I think maintenance mode is the same. This is the excerpt from the
relativeinfo in the service manual. Example:
Basically you press# * c * ( to get into maint. mode Press 20 Start 01 start (then the
maintenance counter will clear) I hope you can figure it out The drum and dev counts are below To enter the serviceman test
command mode, press the keys as follows: [#] key → [*] key → [C] key → [*] key To
cancel the test command mode, press the [CA] key. [10KEY]:(number pad) Entry of MAIN CODE/SUB
CODE Selection of an item Setup of an adjustment value in
case of test commands for adjustment [←/→]: Selection of MAIN CODE/SUB
CODE Selection of an item [OK (ENTER)/START]: Settlement <In case of test commands for
print> [OK (ENTER)]: Settlement (Without
print) [START]: Settlement/Print [C]: (Interrupting operation
check) Returns to the upper hierarchy. In case of test command of
operation check, terminates the operations. [CA]: Exits from the test command
mode. For a
test command of adjustment, the display returns to the initial display (00-00). 20 01
Maintenance counter clear (M-CNT CLR.) 24 06 Developer counter clear
(DVLP CLR.) 2407 Drum counter clear (DRUM CLR.)
mr engineer please check the drum mark sensor and clean it and also check the check the toner motor connector and do this program c interrupt 0 interrupt ,44 copy key 07 copy key after stoping the machine off and then on but first clean drum unit maintenance code is 20 then copy key and then three times ca ca ca
×