Kirby ultimate won't turn on - Kirby G4 Bagged Upright Vacuum

I do not know of any screws that would be stripped right at the fan. Here is a walk through on removing and replacing the fan, the shaft needs to be turned counter clockwise.
Kirby Fan Replacement

800-775-6586
GoodVac com

see if power into cabe use volt meter

It is the rubber belt that spins the brush. It must have worn out. Buy a new one.
http://www.amazon.com/Kirby-Cleaner-301291-3-Generation-Ultimate/dp/B0014SQVKK

needs a new neutral cam bracket, phone your local kirby agent for service. cam bracket is $15

Hello Gary,

This should help.

Also look at this manual.

Good Luck,

Rocky

If you are refitting the shampoo tank, you havent turned it far enough. There is a safety switch that must lock

If you still have not shampooed your rugs - here is the Kirby Shampoo Manual ONLINE

Make sure the bag assembly and either the power nozzle, or hose attachment are correctly attached. The kirby has safety swithes that are only engaged when these components are correctly installed. They look like small resessed buttons on the base unit. if they are not engaged the vacuum will not turn on. Keeps curious fingers from getting into the "spinny" parts ;o)

No, you just need to take it to a shop for repair.

Check out my online guide. I also have instruction manuals!

http://reviews.ebay.com/CHANGING-THE-BELT-ON-A-KIRBY-G3-G4-G5-GSIX-ULTIMATE-G_W0QQugidZ10000000003720039

Marci