See my Clutch Fix post. Anyone with basic mechanical skill sets can save there $1000 machine for low cost maintenance or Clutch pulley replacement.......Rich

FAV6800A/FAV9800A Service Manual for reference. Sears Parts Direct for reference.

May 13, 2010 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Maytag neptune top load washer displaying letters "dc" and won't finish cycle

If the clutch fails the first thing noticed is a UC or DC error displayed and there is no drain or spin.

If you are seeing the above error and having a problem with spin and drain then the most likely cause of this is the clutch. The clutch fails to lock down the spinners and the basket is unable to go into spin and without a 90 RPM there is no drain.

Replace the clutch.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question&*@#$^

Mar 24, 2010 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Old Maytag Dependable care washer - LAT8506

Need to replace the belt going to the transmisssion powered by the motor. these act like a clutch for the unit. It is worn out and needs replaced.

Jan 26, 2010 | Maytag Dependable Care LAT9206

1 Answer

I have a maytag washer and when it spins the agetater cycle tries to kick in,someone said the transmission in the thing could have a bad clutch,also would cost more to fix than buying a new one

transmission cost about $200,clutch is $70 you can get get a maytag centennial washer and dryer for $548

Jan 03, 2010 | Maytag PAV2300 Top Load Washer

2 Answers

Maytag Neptune TL clutch problems- Class Action Lawsuit??

I sounds like this is a common problem with the Maytag Neptune TL after about 3-5 years. Mine finally went out yesterday after several months of bearings getting louder all of the time. It looks like the bearings and the controller are gone. What happened to washing machines that last 15 - 20 years?

Dec 07, 2009 | Maytag Washing Machines

1 Answer

MAYTAG WASHER THAT WAS IN MID CYCLE AND STOPPED AT THE RINSE AND SPIN PART. TURNED OFF THE WASHER AND TURNED ON BUT MAKES A CLICKING NOISE. ALSO LOUD WHEN ITS IN THE SPIN CYCLE. HELP!!!

Sounds like the clutch spring is broken. You should have a UC or DC error code showing on the display. Only fix is to replace the clutch assembly.

Oct 22, 2009 | Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Maytag washer dc error

Oct 18, 2009 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

Maytag 6300 won't agitate durring wash cycle

HI. this is usually caused by a faulty drive assembly(agitator gear components and clutch malfunction).

I recommend replacing the agitator components by purchasing a Agitator replacement kit. and, replace the clutch assembly as well. this will fix this issue.

Jun 17, 2009 | Maytag Atlantis MAV6451 Top Load Washer

1 Answer

Clutch on a maytag

no this machine has a thrust bearing not a clutch if the machine is not spinning well you need to replace the thrust bearing kit it come with a new drive pulley

Jan 19, 2009 | Maytag Atlantis MAV6000 Top Load Washer

Not finding what you are looking for?

View Most Popular

PAV2300 Top Load Washer

Washing Machines

Need instructions for setting the drive pulley on a Maytag A104

Maytag Neptune FAV6800AW Top Load Washer

Open Questions:

0 Answers

Ask a Question

Usually answered in minutes!

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual

Manual. user-manual-PAV2300 Top Load...

PAV2300 Top Load...

Have a manual for Maytag PAV2300 Top Load Washer? Or just drag it here!

Replace a clutch on Maytag washer - Maytag PAV2300 Top Load Washer

Add Your Answer

Attachments: Added items

Related Questions:

Need instructions for setting the drive pulley on a Maytag A104

Getting dc error code in rinse cycle, 13 min.

Maytag neptune top load washer displaying letters "dc" and won't finish cycle

Old Maytag Dependable care washer - LAT8506

I have a maytag washer and when it spins the agetater cycle tries to kick in,someone said the transmission in the thing could have a bad clutch,also would cost more to fix than buying a new one

Maytag Neptune TL clutch problems- Class Action Lawsuit??

MAYTAG WASHER THAT WAS IN MID CYCLE AND STOPPED AT THE RINSE AND SPIN PART. TURNED OFF THE WASHER AND TURNED ON BUT MAKES A CLICKING NOISE. ALSO LOUD WHEN ITS IN THE SPIN CYCLE. HELP!!!

Maytag washer dc error

Maytag 6300 won't agitate durring wash cycle

Clutch on a maytag

Not finding what you are looking for?

PAV2300 Top Load Washer

Need instructions for setting the drive pulley on a Maytag A104

Open Questions:

How do I open cabinet so I can check the water pressure switch and tube to stop overflow?

does not spin fast enough

white residue under washing machine

Why are my clothes still wet after spin cycle completes?

Related Topics:

Ask a Question

Top Maytag Washing Machines Experts

Sheldon Dedek

Dan Webster

Brad Brown

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Manuals & User Guides

Manual. user-manual-PAV2300 Top Load...

Replace a clutch on Maytag washer - Maytag PAV2300 Top Load Washer

Add Your Answer

Attachments: Added items

Related Questions:

Need instructions for setting the drive pulley on a Maytag A104

Getting dc error code in rinse cycle, 13 min.

Maytag neptune top load washer displaying letters "dc" and won't finish cycle

Old Maytag Dependable care washer - LAT8506

I have a maytag washer and when it spins the agetater cycle tries to kick in,someone said the transmission in the thing could have a bad clutch,also would cost more to fix than buying a new one

Maytag Neptune TL clutch problems- Class Action Lawsuit??

MAYTAG WASHER THAT WAS IN MID CYCLE AND STOPPED AT THE RINSE AND SPIN PART. TURNED OFF THE WASHER AND TURNED ON BUT MAKES A CLICKING NOISE. ALSO LOUD WHEN ITS IN THE SPIN CYCLE. HELP!!!

Maytag washer dc error

Maytag 6300 won't agitate durring wash cycle

Clutch on a maytag

Not finding what you are looking for?

PAV2300 Top Load Washer

Need instructions for setting the drive pulley on a Maytag A104

Open Questions:

How do I open cabinet so I can check the water pressure switch and tube to stop overflow?

does not spin fast enough

white residue under washing machine

Why are my clothes still wet after spin cycle completes?

Related Topics:

Ask a Question

Popular Questions

Washer leaking water from bottom

Maytag Neptune Error COde "nd"

Want to disengage lid lock on maytag centennial

Maytag 2000 series shows error code f6 e1. How can I fix?

How to replace Maytag Washer belt

Top Maytag Washing Machines Experts

Sheldon Dedek

Dan Webster

Brad Brown

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Manuals & User Guides

Manual. user-manual-PAV2300 Top Load...