Kingston data travler 6602522 - Kingston (DTIU3/2GB) 2 GB USB Hard Drive

Hi qais_baba

1...Plug your Kingston data traveler in to your computer
2...Go to desktop and open "My Computer"
3. You will see your Kingston Data Traveler listed there
4...Right click on the Data Traveler
5...Click on "Format"
This will format your Kingston Data Traveler
Please rate me
Bud

not sure what sort of problems because you have not stated

click start control panel administrative tools computer management device manager scroll down universal serial bus controllers you could see a yellow question / exclamation mark? ! or a red X

you will need to update/reinstall drivers

right click to reinstall drivers

if you can see your usb drive but its not working

ports (com&lpt) right click update driver if this fails to fix the problem

check the USB leads that attach to the motherboard usually red white green black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems for a computer and its parts

if you need more help with this post a reply

hope this helps you

try to re-format your kinston data traveler, or insert to other known good USB ports in other desktops or laptops.if still unreadable, you have to replace it or have it checked first if there is virus.

If you have another known good jumpdrive veryify that the usb's are working by pluging it in and verifying that you can acess the data on it. If you can then most likely you have purchased a defective unit and will need to exchange it.

is there a lock or switch on it? if so slide the button down and you should be able to write to it.

Yes,


Reformat it

Not quite enough information to give you a direct link so you will have to
click a few buttons.

First go to Kingston Technology
This link should take you direct to the USB flash drive support page.
http://www.kingston.com/support/USBFLASHDRIVES/default.asp

Find the picture that matches your drive and click to see that models support information. Along the right lower side there should be a link to download either the user guide or user manual. If you can't find it you can click on the email support link or call Kingston and they should be able to direct you to the manual.

When you plug in the Flash Drive to your old computer, it will show up in My Computer probably as Removable disk or "Kingston Data Travler". You want to open that link up and drag whatever files you need into that folder. After doing so you put the flash drive in your new computer and repeat the process except you drag the files out of the folder and onto your desktop or a folder of your liking.

there is a small chance that your pen drive might be affected with viruses try formattin the pen drive and then let me know 

The drivers are needed only for windows 98 and back. Xp, mac all do not need drivers for the thumb drives.

May be something else is wrong... mostly software related.