Where is the reset button on my mouse? - Microsoft Wireless Laser Mouse 6000 v2.0

Turn the computer off. Find the reset button on the keyboard & the other on the mouse. Sometimes they list the button as "calibrate" or even "Sync". Some models require that you push both buttons at the same time and hold them down to reset them to working order. Others only have one button on the mouse or keyboard to reset the calibration.

Reseting the mouse and keyboard has nothing to do with the pc. You can reset them with commands from your computer.

After you push the reset buttons, turn your computer on and see if your keyboard and mouse are now available.

This should solve your problem.

Hi,

1. Press the sync button on the reciever (the only button on the reciever)

2. When the light blinks, press the sync button on the mouse (the button you are talking about on the mouse is a sync button, not a reset button, there is no reset button on the mouse), after you press the sync button on the mouse, the blinking will stop and will remain steady

Please post your feedback and Vote if the proble resolved as per your satisfaction.

Press the reset button underneath the mouse and also press the reset button of the receiver.

You will need to press and hold the connect or reset button on the wireless mouse receiver that is plugged into your computer. While pressing that button also press the connect or reset button on the bottom of the actual mouse. The lights should blink indicating they are now connected and you should be good to go!
Please let me know if you have any further questions or problems.

There is reset button on the mouse as well as in the reciver, first you have to press the reset button on the reciver and then you have to press reset button on the mouse within 30sec

the reset button on the mouse should be on the underside

If you haven't done this, turn the mouse over and press the reset/connect button on the bottom of the mouse. After you replace batteries it sometimes requires this to be done. If that didn't work, first press the receiver button, then the mouse reset/connect button.
Hope this helps. Bud

you should hold the reset button on the receiver for 5 seconds. let it go and immediately press the reset button on the mouse once. If done in this order it should be ok.

Try resetting the mouse. On the base of the mouse, there is a red reset button. Press that, while simultaneously pressing the black reset button on the base of the charger. The laser light should becomes steady after a moment, indicating that the mouse is in sync with the laptop. If the laser is blinking, however, then the mouse is attempting to become synced. You may have to press the reset button multiple times. Hope this helps.

I just read one of the other solutions, and it was to try and press the reset and mouse reset buttons together - woked for me! yay!

Louise