Question about Jenn-Air JED8430 Electric Cooktop
Posted by Anonymous on
How do you get the inside area of the vent clean from the grease and oils where the filter is?? I have a rectangular box style downdraft that the vent goes into the floor, I pulled the filter, but the box is to slender to get an arm into to scrub the grease....... does the bottom come off, or is it a sealed unit? How do you get all the brease from the bottom if you cannot reach it?
Posted on Nov 30, 2008
Here is a blowup diagram of the cooktop.
Looking up the service manual - it is no longer available.
Hope this is helpful.
Thanks for using FixYa!!
Posted on Apr 29, 2009
SOURCE: Replacing an old jenn air
You should just be able to set the cooktop in after you attach the downdraft, usually there are tabs on the downdraft that clamp on to the granite cutout. There is probably a closed-cell foam strip that runs under the lip of the cooktop, I would just make sure it seals to the granite properly (no gaps) and put a couple dabs of silicone in between the lip of the cooktop and the granite. Usually the cooktop is heavy enough that the silicone will keep it from moving around.
Posted on Apr 25, 2011
Tips for a great answer:
Mar 16, 2015 | Viking Cooktops
Mar 25, 2011 | Jenn-Air 30 in. Expressions CCGX2420 Gas...
Aug 07, 2009 | Jenn-Air 30 in. CVE3401 Electric Cooktop
Apr 25, 2009 | Jenn-Air 30 in. CVE3401 Electric Cooktop
Feb 24, 2009 | Jenn-Air JED8430 Electric Cooktop
Nov 04, 2008 | Jenn-Air JED8430 Electric Cooktop
Jul 09, 2008 | Jenn-Air JED8230 Electric Cooktop
Apr 07, 2008 | Jenn-Air 30 in. CVE3401 Electric Cooktop
99 people viewed this question
Usually answered in minutes!