Question about Kenwood KDC-MP228 CD Player
Posted by Anonymous on
Same problem here..After couple of hours found the temporary solution. 1. Turn it off 2.Turn on and wait about 3-4 sec and press eject button long press The disk will come out
Posted on Jan 01, 2010
SOURCE: Kenwood DDX-514 label wires
90% of new and aftermarket harness' are the same, Red any Yellow are Constant 12v and ACC. 12v. Black is ground, Green is rear left speakers, Purple is the right rear. White is front left and Grey front right. Blue solid is Power Antenna, Blue with a white is an AMP Relay. (Which is another 12v ACC) You should have some sort of AV in/out lines for the rear screens, if that was an issue.
Posted on Jan 09, 2010
You will need to visit an Authorized Dealer or service center for that product to get the unlock code reset. You can find a dealer listing on their website, or call them.
Posted on Feb 04, 2011
Tips for a great answer:
Usually answered in minutes!
Step 2: Please assign your manual to a product: