Need a SD card - Vivitar Vivicam 5388 Digital Camera

It sounds like the tablet is having trouble reading your 128 GB SD cards.
There are a few things you can try to troubleshoot this issue:

1. Check the SD card for any visible damage. If the card is physically damaged, it may not work correctly.
2. Make sure that the SD card is properly inserted into the SD card slot on the tablet. It should fit snugly and be fully inserted.
3. Check that the SD card is compatible with your tablet. Some tablets can only support SD cards up to a certain capacity or with a certain type of file system.
4. If the SD card was working fine before and has suddenly stopped working, it's possible that the card has become corrupt. In this case, you may need to format the card to fix the issue.
5. If none of these steps help, you may need to try a different SD card to see if the issue is with the tablet or the SD card.

You only need SD card for storing extra data or for external storage. If your phone's internal memory has good capacity, you do not need an SD card for storing extra data.

However SD cards can be used for storing your important files externally. So if your phone doesn't support SD card, please keep a backup of your files elsewhere.

you need to get sd adapter

if theres a slot for an sd card on your computer you need a micro sd card adapter. if it doesnt have an sd card slot you need to buy a usb memory card reader (making sure it takes a micro sd card first)

 

both are widely available in supermarkets/electrical outlets or on ebay/amazon/play etc and are very inexpensive.

 

 

(micro sd adapter)

 

(memory card reader)

              

You will find the SD card holder to keep the SD card. then keep the sd card holder in the laptop slot.

You need to install the drivers of sd card reader also to work.

You need an SD Card, an SD Card reader and a photo frame with an SD card slot. Put the SD card into the SD card reader and plug that into your imac, transfer your photos to the card and then remove the card and put it in the photo frame

Need a little clarity on what your saying XP does recognize the SD card when you mount the phone to the computer, or it doesn't?

Well here is what you can try. and just remember ALWAYS ALWAYS ALWAYS do this before removing your SD card from your phone.

Settings>SD card & phone storage>Unmount SD card

Now if your phone has "Unmount SD card" blacked out then don't worry about just go ahead and remove the SD card.

Take the card and put it in a card reader and put it in your computer. Go to: Start>My computer> (and the drive corresponding to the SD card.) and then try to open it. If a window comes up saying something like drive E: is not formatted, Format now? and then Ok or cancel well if this comes up it could be one of three reasons; the SD card is not properly formatted, SD card is damaged, or the SD card reader is not working properly. So before trying to format the SD card try another card reader or try it on a different computer. If that doesn't work try to format the SD card. If formatting the SD card doesn't work, you may need to buy another one. If you do decide to get another one check Amazon.com they have good prices for the SD cards however if you prefer local buying best place to go (that I've found) is Radio Shack. They always have sales on the MicroSD cards. One other thing. For some reason. SanDisk Micro Sd cards seem to work the best for the G1. The transend cards are utter **** and worthless. Avoid buying them anytime your in the market for a new SD card or USB flash drive.

If you need further help feel free to check out xda-developers.com

Hello :

Look for a tiny switch on the side of the SD card . This switch indicated [ Lock or Unlock ] . You need to unlock it . If that didn't help , then you need to format the SD card before using it . If that didn't help also , then the problem is with your Camera and not with the SD card . there also must be a sensor in the [ reader on the camera ] which detects the position of the switch. Maybe there is dirt in the sensor. The best way to check would be to try another SD card . but you could try blowing out any possible dirt and see if that fixes the problem . If that didn't help , then you need to format your 4giga SD card before inserting it inside your Camera .


PLEASE DON'T FORGET TO RATE !

good luck .

No you don't need something to make your sandisk(sd) card to work when you place it in the sd slot of your computer, now if your sd card is a hc or high compacity card then it would not work because the sd card reader is not new upgraded enough to the point of reading the hc cards if its not a hc card then your sd card reader may be broken you can buy a good new sd card and more port hub to work on your computer but i would check first if it is your card not the card reader.

Is the SD card a mini type or a standard SD card?
The standard SD card is 24mm wide X 32mm long.
If it is a mini SD card you need to purchase a mini SD to standard SD adapter, then you will be able to insert it in your Compaq.