Webcamera won't work!

1st You download Webcam Driver.
Driver for webcamera Logitech v-ual9 pn:861154 sn:lma43815436
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

Hello Sure ,

Check The Link Below :
To Check Your system <Xp , Vista , Seven >
And Download Full Driver .

Logitech QuickCam Communicate STX Personal Web Camera

You are correct.
For Logitech to work with Skype you need to install the Logitech driver for your model WEBcab. Then you need to configure Skype to use the Logitech WEBcam and microphone.

To test if the Logitech QuickCam is functioning, check the USB cable; make sure it is connected properly. Then click on Start - All Program - Logitech - Logitech QuickCam and see if you can get the camera to capture your image/video.
If this works then configure Skype. Sometimes the WEBcam settings drop off and the WEBcam need to be selected again. Open Skype - Tools - Options - Video Settings and select the Logitech QuickCam
Also check the Audio Settings for the Microphone THEN click on Save.
Avoid connecting the WEBcam to an USB hub, connect it directly to the computer's USB port.

Go to cnet.com or the logitech website. If all else fails, type that same question in google . .magic happens with google :)

re install the driver

Hi,

You can download here from Logitech.

http://www.logitech.com/index.cfm/405/&cl=us,en?prodcrid=405

Just pick your webcam.

uninstall the software

plug in your webcam
in the system tray you will see a icon indicating new hardware detected,then install the software..
if your computer is not recognizing the device plug into the other USB ports ,stil not detected there is a problem with your webcam

Have you tried reinstalling your drivers? Theres one available here http://drivers.softpedia.com/get/SCANNER-Digital-CAMERA-WEBCAM/LOGITECH/Logitech-QuickCam-Communicate-STX.shtml

HI YOU CAN DOWNLOAD THE SOFTWARE FOR LOGITECH WEBCAM FROM THIS LINK http://www.logitech.com/index.cfm/suppor...

there should be a full manual on the CD in pdf format which accompanied the Webcam.. the 4 page guide was most likely the Quick start guide