Question about GE 32GT740 32" TV

Open Question

LHT764 Remote codes for Hargray Remote

Need a code to program the hargray remote to the LG DVD Combo to work the sound

Posted by Anonymous on

Ad

5 Related Answers

Anonymous

  • 4 Answers

SOURCE: need codes for universal remote

JVC TV CODES:
060 026 197 069 247 923 012 065 067 141

NEED STEPS RE PROGRAM MY TV. I LOST INSTRUCTIONS. I DO HAVE CODES.

THANKS

Posted on Jan 06, 2008

Ad
VOTIT

LORETO LACARON

  • 2071 Answers

SOURCE: GE 19GT243 REMOTE CONTROL CODE FOR A RADIO SHACK 3-IN-ONE REMOTE

http://www.hifi-remote.com/ofa/codes-tv.shtml#tv

If none of the codes work then we have two other solutions:

1. Searching For Your Code

If you have tried all of the set-up codes for your brand of equipment ,or yourbrand is not listed, and you are still not able to get the unit to respond, trythe following procedure to search for your code.
If you don't find a code that works, the remote will flash four times when youreach the end of all the codes for this device type.

  1. PRESS the button for the device you want to program, (TV, VCR, CABLE, etc.), then RELEASE.
  2. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
  3. ENTER 9-9-1 (two blinks on the remote)
  4. ALTERNATE slowly between the POWER key and the DEVICE (TV, VCR, CABLE, etc.) button until your device turns off. (On VCR, LD, and CD players use PLAY instead of POWER)
    Make sure that the remote is pointed at your device during the search, You may have to press this sequences of buttons up to 100 times to search the entire library of codes.
  5. When your device turns OFF, PRESS the SETUP button and RELEASE it to lock in the code for your device.

2. Learn the buttons from the original

Line up your original remote and the head-to-head before completing thefollowing steps.
  1. PRESS and HOLD the SETUP button until the red LED flashes twice.
  2. PRESS 9 - 7 - 5, the red LED will flash twice.
  3. PRESS the DEVICE key where you wish to learn the function. The next 3 steps must be completed within 10 seconds.
  4. PRESS the button that will receive the learned function, the LED will flash rapidly.
  5. PRESS the button on the original remote to be learned.

Now you can repeat steps 3 through 5 to learn other functions onto other keysor press and hold SETUP until the Cinema's red light flashes twice to lock inyour new feature. (If the red light does not blink twice, stop and repeat stepsthrough 6).
To test the new feature, press and release the device key in which the newfeature was learned followed by the key on which the feature was learned

More help for programming your remote can be found here:
http://www.hifi-remote.com/manuals/ofa-l.shtml?URC-7800#device

Hope that helps! Should you have any further questions,please feel free to post them here.
Television Video - DVD Audio Satellite Set Top Box Video - VCR Brand: Model (optional): clip_image001.gifclip_image001.gifWe could not find an exact match, we think this code will work. 10054 clip_image001.gifclip_image001.gifSetup Instructions
· Set the "Mode Switch" to TV.
· Press and hold the "Mute" button and the "Select" button until the visible LED blinks twice.
· Enter the 5 digit Code above.
· Try your new code and tell us how it worked!
You'll have to settle for that, use the middle power key in the tv device to power on & off the tv.


hope this may help;

Regards,
VOTIT

DON'T FORGET TO RATE;

Posted on Sep 03, 2008

Ad
ladywinn

ladywinn

  • 5138 Answers

SOURCE: need universal code for 25gt240

codes 000,054,003,004,006,022,052,055,087,164,165,166,167,168,181,196,213.

Posted on Dec 12, 2008

ladywinn

ladywinn

  • 5138 Answers

SOURCE: need tv code #

GE Codes 000-003-004-006-022-052-054-055-087-164-165-166-167-168-181-196-213

Posted on Dec 27, 2008

Anonymous

  • 1 Answer

SOURCE: how do i program the ge universal remote, model rc24912-e

http://www.jascoproducts.com/support/download-files/RemoteCode-4-digit.pdf

Posted on Dec 27, 2008

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

I need code for philip s remote for a sayno ty

Philips rca universal remote codes sayno vcr dvd combo ...

www.fixya.com > ... > Remote Controls
Universal Philips Magnavox remote for a Sanyodvd vcr combo ? I have a cableremote and need to program my Magnavox vcr/dvd combo into it i have 2 dvds ...

How to Reprogram a Philips Universal Remote Controller ...

science.opposingviews.com > Computers
0helpful
1answer

I have a Samsung Stereo receiver and the codes I have don't work is there more codes to try?

If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
0helpful
1answer

Codes for lg

Try codes for NEC or teac as well. They are same company.
0helpful
1answer

Have a Cisco remote control (Hargray is the provider) for a Vizio TV. Can't get the mute to work...is there a code for this?

Please try the following codes: 0004, 2302, 1017, 0178, 1758.
If the TV requires a 5 digit code;  10178, 11017.
The one that works most often is 1758
1helpful
2answers

Need code for magnavox tv urc-4021boo

Hi, the codes you have requested;

Magnavox - 0054, 0706, 0030, 1454, 1254

Instructions to program code:

1. Turn on a desired device (e.g.,VCR or DVD player) and, if applicable, insert media (e.g., cassette or disc). NOTE: Please read steps 2 through 4 completely before proceeding. Highlight or write down the codes and device you wish to program before starting step 2.

2. On the remote control,press a device key once (i.e., VCR/PVR, DVD, CBL/SAT,or TV).
NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo, or TV/VCR/DVD Player Combo press VCR/PVR once.After programming a VCR Combo device, you will be able to control channel selection, volume, and VCR functions. NOTE: To program control of a DVD Player,DVD Player/VCR Combo, or TV/DVD Player Combo, press DVD once.After programming a DVD Combo device, you will be able to control channel selection, volume, and DVD functions. NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR) Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR) Combo, press CBL/SAT once.

3. Press and hold SET until the LED (red light) blinks twice,then release SET.

4. Use the Manufacturer's Codes (starting on page 18) to locate the type of device and brand name and then enter the first four-digit code for your device. If performed correctly,
the LED will blink twice. NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.

5. Aim the remote control at the device and press POWER once.The device should turn off. If it does not, repeat steps 2 through 5, trying each code for your brand until you find one that works.
0helpful
1answer

Need codes for Go.Video remote control

Go video remote for dvd/vcr recorder combo; you program TV by 2 digit codes. press TV power down when TV is powered on; and input 11 for JVC TV, or 03 for GE TV. You can experiment any two digit codes until TV shut down, then you have just finished programing n150b remote. This also work for all LG dvd/vcr combo recorder remote such as 6711RN203A..
3helpful
1answer

Panasonic quintrix tv code for lg v271 dvd/vcr combo remote

From another post, 0650 worked for me.

Panasonic TV 0051 0250 0650 0055 0162 0226 0338 0375 0637
1helpful
1answer

I need a remote code

I need the codes for my Panasonic DVD/VCR combo, but in desperate needs of codes..please help!
0helpful
1answer

Remote code

Manufacturer Codes
LG/Goldstar 1, 2
Zenith 1, 3, 4
Samsung 6, 7
Sony 8, 9
Hitachi 4

That is the whole list from the manual
0helpful
1answer
Not finding what you are looking for?
GE 32GT740 32" TV Logo

Related Topics:

372 views

Ask a Question

Usually answered in minutes!

Top GE Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76823 Answers

Cindy Wells

Level 3 Expert

6395 Answers

 Francisco Mauricio...
Francisco Mauricio...

Level 3 Expert

1551 Answers

Are you a GE Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...