Question about Canon Pixma MX410 All-In-One Printer

1 Answer

We had a power outage, now pixma Mx410 won't come on, any ideas?

Posted by Sonja Dobson on

Ad

1 Answer

supermex

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Is pinter plugged into a power strip? Try plugging directly into wall. Make sure wall outlet is working correctly, try another item in plug in. Does printer have a power module or brick that is plugged into printer? That power module is there to protect your printer during a power surge, it may need to be reset. Is there a light on that brick or power module? If so, does it light up? If not, could be a bad power module. There is no such thing as "reset" button, so don't look there...It will have to be reset in a series of ways for an "external" module.

  1. Disconnect the power cord from the rear of the printer.
  2. Unplug the power cord from the wall outlet, power strip, or surge protector.
  3. If the printer uses a power module with a detachable power cord, disconnect the cord from the power module.
  4. Wait 15 seconds.
  5. If the printer uses a power module with a detachable power cord, reconnect the power cord to the power module.
  6. Reconnect the power cord to the rear of the printer.
  7. Plug the power cord directly into a wall outlet. Do not use a power strip or surge protector.
  8. Check to see if the power module or the power cord has an indicator light and if it is on
For an internal module:
  1. Disconnect the power cord from the rear of the printer.
  2. Unplug the power cord from the wall outlet, power strip, or surge protector.
  3. Wait 15 seconds.
  4. Reconnect the power cord to the rear of the printer.
  5. Plug the power cord directly into a wall outlet. Do not use a power strip or surge protector.
  6. Check to see if the power module has an indicator light.
Not sure if this will help you..but worth a try.....

Posted on Jun 15, 2014

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Npinter is probelems 5b00 how to solft probelems


Hi
Not perhaps as helpful as we would both prefer but all the manual (which can be found here:-
Canon PIXMA MX410
and downloaded and installed to your computer) says about this 5b00 error is:- "The machine error has occurred. Contact the service center."
A slightly better idea is on the Canon site here
PIXMA Printer Error Codes and Error Messages
Good Luck

Nov 27, 2014 | Canon Pixma MX410 All-In-One Printer

2 Answers

Where is the ink absorber located on my pixma mx410


I don't have a Pixma printer but the ink absorbers are usually located at the right side if the printer just under the print heads. This is the area used by the printer to clean the print heads. My guess is that more of the ink used by a printer ends up here instead of of be ing used for printing. There is good information on youtube. See Link
Canon Pixma MX410 ink asorber YouTube

Jul 31, 2014 | Canon Pixma MX410 All-In-One Printer

1 Answer

Why is my Canon Pixma MX410 printer not printing properly


in the program you got with the printer you have a facility that's lets you clean the heads and Re alien your printer heads this program also helps you to fined out if the ink is low you can find your user manual in main programs under (canon utilities) but if you don't have the manual, www.canon.com.au/en-AU/Personal/Products/.../PIXMA.../MX410 and here you can download drivers updates and the manual.

Jul 03, 2014 | Canon Pixma MX410 All-In-One Printer

1 Answer

Why has PIXMA MX410 printer stopped working? Re-installed Canon PIXMA MX410 All-In-One Printer on hp pavilion 23 widow 8 x 64, system would only print but menu solutions would not. Then printer stoppe


Driver issue. Uninstall and reinstall driver for win 8 64 bit - should work if same worked before. Did you try a system restore to time when printer was working properly?

Sep 11, 2017 | Canon Office Equipment & Supplies

1 Answer

Whenever I scan a picture, It's blurry. Canon Mx410


I had the same problem.
My DPI setting was at 25.
I upped it to 600 and the document scanned perfectly.

Jun 04, 2013 | Canon Pixma MX410 All-In-One Printer

1 Answer

Mx410 won't recognize new cartridges


clean cartridge contact point (electrical contact for signal transfer) and try again

May 17, 2012 | Canon Pixma MX410 All-In-One Printer

1 Answer

Canon MX410 won't scan from the adf


Thank you, old marine! That fixed my problem!

Feb 12, 2012 | Canon Pixma MX410 All-In-One Printer

Not finding what you are looking for?
Canon Pixma MX410 All-In-One Printer Logo

674 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2330 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Cindy Wells

Level 3 Expert

6238 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...