How to change input with out a remote - Symphonic ST420FF 20" TV

Search Results

How do I change the input on my television? ' FAQ ' Cogeco ...

https://www.cogeco.ca/.../how-do-i-change-the-input-on-my-tele...

CogecoClick on the TV button near the top of the remote. Click on the video source button on the bottom left corner of the remote. Using the arrow keys to highlight/select the inputyou want. Some televisions may require pressing the source button multiple times to change the inputs.

Understanding Inputs - Harmony Support - MyHarmony

https://support.myharmony.com/.../understanding-different-input-changi...
Televisions, AV receivers, soundbars and other home electronic devices switch ...Devices with toggle (or cycle) inputs have a single button on their remote that ... In the below example, you would press the Source button to bring up a list of ...

Changing AV input on TV using Sky remote ' AVForums

www.avforums.com > ... > Satellite TV, Sky TV & FreeSat
Changing AV input on TV using Sky remote. Discussion in 'Satellite TV, Sky TV ...VSX-924 LG simplink changing AV source to TV. Posted By djrobmac In AV ...

Selecting the DVD, VCR, Game Console, HDTV, Camera, or ...

If the remote is its original one, there should be a button marked 'TV/AV'. Press this button to select inputs.

As there is no menu button on the front of the TV, you must have its remote control to select he inputs.

Unfortunately, the Input button (to change the source from INPUT 1, INPUT 2,
INPUT 3, INPUT 4, Front Input, HDMI/DVI, and last-active channel) is only on the remote. If your universal remote was built 6 months after the TV was released, try a different code for RCA/Thomson TVs (assuming the remote has an input or source key). Thomson built the TV.

If your universal remote doesn't have an input key, you probably need a higher end remote (one with that key or one that can be programmed from a computer). Alternatively, you can get an exact replacement remote here: http://www.remotes.com/remotes/servlet/rs?a=Search&o=c&uid=0&m=HD52W58&uuid=12927154203570 .

I hope this helps.

Cindy Wells

I would suggest you try to find a universal remote that has an "input" or "source" button and program that one to your tv. By pressing the "source" or "input" button, it will change the input to the tv. I hope this helps! -Der Strom

Try channel button to 1-2-3--99-98-1-2-3 up & down it should come between 0 & 1

Try this website 1-800-remotes Factory original u can buy an original remote,tries Channels up or down couple times u should get in the input 1 or 2.

on your remote there is a input button if you
have the factory remote.press this and will
change inputs.

If you have lost the remote, go to any electronics store and buy a universal one. I have programmed many generic remote controls, and they all work fine for adjusting the video inputs. Not all television sets allow their video inputs to be switched without the remote. Most likely you will have to buy a replacement.

using the menu button on the t.v. set an alarm for 1 min in the future. have the t.v change to channel 00 or the input channel @ that time. turn off the t.v and wait until the alarm turns the t.v on.